INSTALLATION
1.Install the seals over the flange 2. Align the auger shafts with the
at the rear of the cooling drums | augers. Push the augers as far |
and press the seals firmly into | as they will go and rotate them |
place as shown. | so the flat face of the auger |
| shaft is aligned with the flat face |
| of the auger nose. |
4.Thoroughly rinse the hoppers 5. Slide them into place and push
and install them over the augers | them down until the hopper |
and cooling drums. | lock plungers snap into place. |
7.Position the faucet seal and re- 8. Slide the faucet valve assembly
turn spring in the faucet valve. | into place on the hopper. |
10.Assemble the drip tray.
3.Install auger nose bushing into inside front of hopper.
6.Set the lids on the hoppers and
plug in the hopper lid lamp cords.
9.Press down on the valve to compress the spring. Position the faucet handle over the fau- cet valve one side at a time and snap into place on the hopper.
27 | 32080.0001 021105 |
|