Software Installation

TRENDnet User’s Guide

Installation

This section describes how to install the driver and utility for the AC1200 Dual Band Wireless USB Adapter.

1.Insert the Utility and Driver CD-ROM into your computer’s CD-ROM Drive and then click Install Utility.

2. Follow the InstallShield Wizard Instructions

1.Plug the AC1200 Dual Band Wireless USB Adapter into an available USB slot on your computer.

Note: Plug the device into an available USB 3.0 port for maximum performance.

2.Verify that the LED is turned on. Continue to the next section on how to configure that wireless adapter.

3.Click Finish to complete installation if prompted for computer restart the computer click OK.