TRENDnet tv-ip301 Power/Link LEDs, Iris Level, Network Cable Connector, Reset Button, O Connector

4. Power/Link LEDs

The upper LED indicates the camera is powered on with a steady GREEN light.

The lower LED indicates the camera has good connection to LAN /WLAN connectivity with a steady GREEN light. It begins flashing to indicate the camera is receiving/sending data from/to the LAN/WLAN.

5. Iris Level

This screw-knob is useful only when the DC-Iris lens is connected to the camera. You can adjust the brightness of the video images from the DC-Iris lens.

6. Network Cable Connector

This RJ-45 connector is used to connect the 10Base-T Ethernet or 100Base-TX Fast Ethernet network (which should be Category 5 twisted-pair cable). The port supports the NWay protocol, allowing the camera to automatically detect or negotiate the transmission speed of the network.

7. Reset Button

Reset will be initiated when this button is pressed. Factory Reset will be initiated when this button is pressed continuously for five seconds.

8. I/O Connector

The camera provides the I/O connectors on the rear panel (pin 1/2 are for input, pin 3/4, 5/6 are for output, pin 7/8 are for RS-485), which provide the physical interface to send and receive digital signals to a variety of external alarm devices.

13