1.Unpack the carton and place the fixture on a flat surface. Attention: All necessary hardware and loose components have been verified for this fixture and are packed inside. Do not discard inner packing until you have inspected it thoroughly.
2.Put the CENTER COLUMN (G) onto the CENTER HOOK (E) of the CANOPY ASSEMBLY(C).
3.Place GLASS (K) Into the GLASS FRAME (L).
4.With the help of another person to hang the bottom hook of HANGER (F) to the GLASS FRAME (L) then hang onto the SIDE HOOK (D) of the CANOPY ASSEMBLY (C).
5.Put the GLASS PANEL (I) on the STEEL ROUND PLATE (J). Align the holes of the GLASS PANEL (I) to the thread holes of the STEEL ROUND PLATE (J) then secure by the BALL NUT (H).
6.Follow the wattage label on the fixture and install proper bulbs (not provided) onto the sockets.
7.For mounting and wiring step please follow the mounting instruction sheet enclosed.
8.
LOOP (A)
NIPPLE (B)
CANOPY ASSEMBLY(C)
SIDE HOOK (D)
CENTER HOOK (E)
HANGER (F)
CENTER COLUMN (G)
BALL NUT (H)
GLASS PANEL (I)
STELL ROUND PLATE (J)
GLASS (K)
GLASS FRAME (L)
