
TMB Programmable Multiband Amplifier
TMB 10A • TMB 10B • TMB 10S
GB
TMB 10A
Input | UHF1 | UHF2 | UHF3 |
Number of filters per | 4 | 2 | - |
3 | 3 | - | |
UHF input | 1 | 5 | - |
| - | 6 | - |
TMB 10B & S
Input | UHF1 | UHF2 | UHF3 |
| 3 | 5 | 2 |
Number of filters per | 1 | 7 | 2 |
- | 8 | 2 | |
UHF input | 3 | - | 7 |
| 1 | - | 9 |
| - | - | 10 |
Each UHF filter can be configured for a bandwidth of 8 to 48 MHz (1 to 6 channels).
Distribution of UHF filters
Go to the menu IN by placing the light segment under the IN mark and press enter.
•Press enter again to change the configuration of the UHF inputs (part of the display flashes)
•Press the buttons + or - to select the distribution of the filters over the UHF inputs.
Notes:
Each UHF filter can be deactivated. Just configure the filter in question to the value – in the "CHAN" menu.
8