Manuals / Tricity Bendix / Laundry Appliance / Washer

Tricity Bendix BIW 102 installation instructions Start the machine, At the end of the programme

Models: BIW 102

1 32

Download 32 pages 35.55 Kb

Page 11

Manual background

5. Select the required programme

Turn the programme selector dial CLOCKWISE to the required programme

6. Start the machine

Before starting up the machine check that:

■the appliance is plugged in

■the water supply taps are turned on

■the door and the detergent dispenser drawer are closed.

Pull the programme selector dial outwards

The mains-on light will illuminate and the machine will start operating

7. At the end of the programme

The machine stops automatically and the mains-on light goes out.

If you have depressed the RINSE HOLD button , the machine will stop with the water left in the tub, to prevent the fabric from creasing. To drain the water release the same button (the clothes will be gently spun) or select programme “14”

The door is controlled by a safety device which releases 3 minutes after the end of the programme.

Before opening the door ensure there is no water in the drum.

Switch the machine off by pushing in the programme selector dial.

When the programme has finished, you are advised to unplug the appliance and turn off the water taps

Leave the door open to prevent the formation of mildew and unpleasant smells.

7

AL040

7

AL041

11

Image 11

Tricity Bendix BIW 102 Start the machine, At the end of the programme, Select the required programme

Contents

35.292.687/1 OPERATING & INSTALLATION INSTRUCTIONSWASHING MACHINE Page Important Safety Information InstallationChild Safety During UseWash Care Symbols ContentsFor the Installer Important Safety InformationHow do we help to protect the environment? We use recycled paper Your New Washing MachineEcological hints In the interest of the environmentDetergent dispenser drawer Description of the Appliance2 Mains-on light The Control Panel1 Detergent dispenser drawer 4 HALF LOAD button3. Add the fabric softener if required Operating Sequence1. Load the laundry 2. Measure out the detergentBefore opening the door ensure there is no water in the drum 6. Start the machine7. At the end of the programme 5. Select the required programme4. Select the required optionS 1. Load the laundry2. Measure out the detergent 3. Add the fabric softener if requiredBefore opening the door ensure there is no water in the drum 6. Start the machine7. At the end of the programme 5. Select the required programmei Washing Hints 1000g = 1 kgColoureds Which detergent to use?Whites Non BiologicalTraditional Powders Using a water softening agentAnd in which form? How much detergent and fabric softener?Important Notes Wash Care SymbolsWASHING SYMBOL DRY CLEANINGWash programme Washing ProgrammesProgrammes for cotton and linen Spin 1000 rpmWashing Programmes Programmes for synthetics, delicates and woolSpin SyntheticsCleaning the dispenser drawer Maintenance and CleaningMaintenance Wash External cleaningThe water inlet filters Cleaning the filterThe dangers of freezing The water drain filterThe machine fills then empties Something Not WorkingThe machine does not start The machine does not fillPossible causes Service & Spare PartsSymptom Customer careThis guarantee does not cover Guarantee ConditionsBendix standard guarantee conditions European guaranteeSCOTLAND To contact your local Bendix Service Force Centre telephone 08705 929CHANNEL ISLANDS NORTH EASTSOUTH EAST To contact your local Bendix Service Force Centre telephone 08705MIDLANDS LONDON & EAST ANGLIATechnical Specifications Installation InstructionsUnpacking Water inlet PositioningWater drainage Some vibration is inevitable, especially if mounted on a wooden floor LevellingSpecial conditions In the interest of the environmentEnsure that the cut off plug is disposed of safely Electrical connectionsPermanent connection WARNING THIS APPLIANCE MUST BE EARTHEDPage  Electrolux Household Appliances Limited 2001/10 Bendix, 55-77 High Street, Slough, Berkshire SL1 1DZConsumer care telephone number 08705