At the end of the timed period an audible signal sounds for up to 7 minutes.
To stop the sound press ( ) button.
The display shows the time of day after a few seconds and the bell symbol will go out. Fig.6.
3.HOW TO SET THE OVEN TIMER CONTROL
A)TO SWITCH ON AND OFF AUTOMATICALLY
i)Ensure time of day is displayed.
ii)Place food in oven.
iii)Set length of cooking time, press
The display shows the auto symbol and cookpot are lit, then reverts to time of day after a few seconds. Fig.8.
v) Set the STOP time. | Press the ( | ) button. |
This shows the earliest possible end time. | ||
Within 5 seconds press the (+) control until | ||
the required stop | time is displayed, e.g. | |
12.30.The display shows as Fig.9 then after a few seconds the time of day shows in the display as Fig.10.
Select Top or Main oven using the programmer button.
If using the main oven, also select the fan or conventional oven using the Main oven function selector button.
NOTE.
When automatic cooking begins, the oven indicator neon will illuminate and will cycle on and off during cooking to show that the temperature is being maintained.
If using the main oven, the function selector neon (
) or ( 
) will illuminate.
4. RETURNING THE COOKER TO MANUAL OR TO CANCEL AN AUTOMATIC PROGRAMME.
At the end of the timed period, the oven will switch off, an audible sound will be heard and the Auto symbol will flash in the display.
To | stop the | sound and flashing press buttons |
( | ) and ( | ) together. |
The display shows the time of day after a few seconds. The cookpot symbol will be lit. The oven will switch on again. Turn all oven controls off, no indicator neons are illuminated.
Fig.6
Fig.7
Fig.8
Fig.9
Fig.10
13
