Fitting the Hob into the worktop

Carry out the building in of the hob as follows:

Φ• put the seals supplied with the hob, on the edges of the cut out: place them exactly on the front and rear edge and at 50 mm. from the side edges, as shown in the diagram, taking care that the seals meet without overlapping;

•place the hob in the cut out, taking care that it is centred;

•fix the hob with the relevant fixing clamps and screws, as shown in the diagram. When the screws have been tightened, the excess seal can be removed.

The edge of the hob forms a double seal which prevents the ingress of liquids.

FO 2039

50

50

Seal

FO 0199

Electrical connections

Any electrical work required to install this hob should be carried out by a qualified electrician or competent person, in accordance with the current regulations.

THIS HOB MUST BE EARTHED.

The manufacturer declines any liability should these safety measures not be observed.

This hob is designed to be connected to a 230-240V 50Hz AC electrical supply.

Before switching on, make sure the electricity supply voltage is the same as that indicated on the hob rating plate. The rating plate is located on the bottom of the hob. A copy is attached on the back cover of this book.

The hob is supplied with a 3 core flexible supply cord incorporating a 3amp plug fitted. In the event of having to change the fuse, a 3amp ASTA approved (BS 1362) fuse must be used.

Should the plug need to be replaced for any reason, the wires in the mains lead are coloured in accordance with

the following code:

 

Green and Yellow

- Earth

Blue

- Neutral

Brown

- Live

Φ— Connect the green and yellow (earth) wire to the terminal in the plug which is marked with

the letter 'E' or the earth symbolor coloured green and yellow.

—Connect the blue (neutral) wire to the terminal in the plug which is marked with the letter 'N' or coloured black.

—Connect the brown (live) wire to the terminal in the plug which is marked with the letter 'L' or coloured red.

Upon completion there must be no cut, or stray strands of wire present and the cord clamp must be secure over the outer sheath.

A cut off plug inserted into a 13 amp socket is a seriuos safety (shock) hazard. Ensure that the cut off plug is disposed of safely.

Permanent Connection

In the case of a permanent connection, it is necessary that you install a double pole switch between the hob and the electricity supply (mains), with a minimum gap of 3 mm. between the switch contacts and of a type suitable for the required load in compliance with the current electric regulations.

The switch must not break the yellow and green earth cable at any point.

Ensure that the hob supply cord does not come into contact with surfaces with temperatures higher than 50 deg. C.

FO 0390

12

Page 11 Page 13
Page 12
Image 12
Tricity Bendix TBG 750 manual Electrical connections, Fitting the Hob into the worktop, Permanent Connection
Page 11 Page 13

TBG 750 specifications

The Tricity Bendix TBG 750 is a versatile and efficient freestanding gas cooker designed for modern kitchens, catering to the needs of home cooks who demand reliability and performance. Known for its robust build quality and a range of features, the TBG 750 brings both style and functionality to any culinary space.

One of the key features of the TBG 750 is its dual-fuel cooking system. This model combines the precision of gas hobs with the even baking capabilities of an electric oven. The gas burners allow for immediate heat control, making it easy to switch from a gentle simmer to a vigorous boil, while the electric oven provides consistent temperature regulation, essential for baking and roasting.

The cooker is equipped with four gas burners, including a powerful wok burner that delivers high heat for stir-frying and other high-intensity cooking methods. This versatility makes it ideal for a variety of cooking styles, from quick weeknight dinners to elaborate feasts. Each burner features a flame failure safety device, enhancing kitchen safety by automatically shutting off the gas supply if the flame goes out.

In terms of oven space, the TBG 750 boasts a spacious main oven with a generous capacity, allowing cooks to prepare multiple dishes simultaneously. The oven features a programmable timer, adding convenience to meal preparation. It also comes with a grill function, enabling users to achieve that perfect golden finish on their favorite dishes.

The interior of the oven is designed with easy cleaning in mind, featuring a smooth enamel coating that prevents food from sticking and makes wipe-downs a breeze. Additionally, the removable inner glass door simplifies cleaning and maintenance.

Another highlight of the Tricity Bendix TBG 750 is its aesthetic appeal. Available in a stainless steel finish, the cooker complements various kitchen designs, adding a contemporary touch. The user-friendly control knobs are positioned for easy access, ensuring a seamless cooking experience.

Moreover, the TBG 750 places a significant emphasis on energy efficiency, with an A energy rating, which not only helps reduce utility bills but also minimizes environmental impact. This makes it an excellent choice for eco-conscious consumers.

Overall, the Tricity Bendix TBG 750 stands out as a reliable, efficient, and stylish cooking appliance that meets the demands of everyday cooking while offering advanced features. With its user-friendly design and a blend of gas and electric cooking technologies, it provides an exceptional cooking experience for both novice and experienced chefs.
Top Page Image Contents