Pan Supports and Wok Stand
To keep the pan supports in the correct position, they are hooked into hinges at the back of the hob.
The pan supports can be lifted for easier cleaning, as shown in fig. 1.
To remove the pan supports completely, proceed as shown in fig. 2.
The pan supports and the Wok Stand are dishwasher proof. If washing them by hand, take care when drying them as the enamelling process occasionally leaves rough edges. If necessay, remove stubborn stains using a paste cleaner.
The Burners
The burner caps and crowns can be removed for cleaning. Wash the burner caps and crowns using hot soapy water, and remove marks with a mild paste cleaner. A well moistened soap impregnated steel wool pad can be used with caution, if the marks are particularly difficult to remove.
After cleaning, be sure to wipe dry with a soft cloth.
FO 2030
Fig. 1
Something Not |
| |
Working? |
| |
If the hob is not working correctly, please carry out the | Fig. 2 | |
following checks before contacting your local Service | ||
| ||
Force Centre. |
|
FO 2238
IMPORTANT: If you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or installation, a charge will be made even if the appliance is under guarantee.
SYMPTOM | SOLUTION |
ν There is no spark when lighting the gas | υ Check that the unit is plugged in and the electrical |
| supply is switched on |
| υ Check that the RCCB has not tripped (if fitted) |
| υ Check the mains fuse has not blown |
| υ Check the burner cap and crown have been |
| replaced correctly, e.g. after cleaning. |
|
|
ν The gas ring burns unevenly | υ Check the main jet is not blocked and the burner |
| crown is clear of food particles. |
| υ Check the burner cap and crown have been |
| replaced correctly, e.g. after cleaning. |
|
|
If after all these checks, your hob still does not operate correctly, contact your local Service Force Centre.
Please note that it will be necessary to provide proof of purchase for any
5
