Further Information
Further Information
MULTI-STAGE COOKING
You can combine two cooking processes in a multi- stage programme.There are two main uses for this process.
ACook food for a period at one power setting and then finish with another power setting. You can for example, cook food and then keep it warm by setting a low power for the second process
BDefrost food and then cook it in one combined process.
After the first stage, the buzzer will sound once and the next stage will automatically start.
If you are defrosting food, this must always be the first process.
The
Example: Defrost the food for 20 minutes, then cook at 50% microwave power for 10 minutes.
1 Press W.T/Time Defrost
Twice
W.T/TimeX2
Defrost
2 Dial in the time
3 Press the Power Setting
buttonPower
Setting
4 Rotate the Function knob to select 50% power
X2
5 Press Start/+30SEC./Confirm
Start/
+30SEC./Confirm
6 Rotate the Function knob to set 10 minutes
7 Press Start/+30SEC./Confirm
Start/
+30SEC./Confirm
The defrost cycle will commence. When the defrost cycle has ended the oven will move on to the cooking process.
TIME DELAYED COOKING
You can preset the time at which the cooking process starts.
AMake sure the clock is set to the correct time
BInput the cooking program. Do NOT press the START button
CSet the clock to the required start time
DPress START/QUICK START to set the programme.
Example: Cook food at 50% power for 10 min starting at21:20
Power
$Press the Power Setting Setting
button.
$Select 50% power.X2
$Press Start/+30SEC./Confirm
Start/
+30SEC./Confirm
$Rotate the Function knob to set 10 minutes
$Press the
Clock/Pre-set button
| |
$Rotate the Function |
|
knob to select 21 hours. |
|
$Press the |
|
button again. |
$Rotate the Function knob to select 20 minutes
$Press Start/+30SEC./Confirm
Start/
+30SEC./Confirm
The display reverts to clock time: When the preset time comes the buzzer sounds twice and the oven will begin the programme.
WhenTime Delayed coking is preset:
$You cannot operate other oven functions.
$Press Stop/Clear to clear a
normal operation.
NOTES ON TIME DELAYED COOKING:
You can use a single program, a multistage program or an You can
Do not use
QUERIES
$During cooking: press the POWER button to briefly display the microwave power in the current programme.
$During cooking: press the CLOCK button to briefly display
the clock time.
$In Time Delay mode: pressing the CLOCK button will briefly display the start time of the
DISPLAYS AND OVEN STATES
$Every time you press a button, the oven will beep once. If the button is not fully depressed, or the action is not part of the process you will not hear a beep and nothing will happen..
$When you first rotate the Function knob in either direction during a cooking process the oven will beep once.
$When setting a cooking process, if you do not confirm the process by pressing the Start/+30SEC./Confirm button within one minute, the process will be cancelled and the oven will revert to displaying the clock time.
$The buzzer will sound five times to remind you when cooking
is finished.
$Before inputting any cooking process, it is good practice to
press the Stop/Clear button twice to clear the oven memory.
TROUBLESHOOTING: If the oven fails to operate:
$Check that the oven is plugged in securely. If it is not, unplug from the outlet, wait 10 seconds and plug it in again securely. $Check for a blown fuse or a tripped circuit breaker. If these are
intact, test the outlet with another appliance. $Check that the clock is set and that the child lock is off. $Make sure that the oven door closes fully and securely.
If none of the above rectifies the situation, contact the Tesco helpline. Do not try to adjust or repair the oven yourself.
