Tripp Lite 200609062 important safety instructions Power It!TM, Power Strip, Installation

Models: 200609062

1 3
Download 3 pages 26 Kb
Page 1
Image 1
Power It!TM

Warranty

 

 

chance—

 

 

a

product

for

 

today

Lite

 

Registration:

 

 

online

Tripp

 

 

 

 

com/warranty

Power It!TM

 

 

FREE

.

 

 

 

 

a

.tripplite

register

 

win

 

 

 

to

www

 

Power Strip

1111 W. 35th Street, Chicago, IL 60609

(773) 869-1234 • www.tripplite.com

IMPORTANT SAFETY INSTRUCTIONS. SAVE THESE INSTRUCTIONS.

CAUTION!

DO NOT connect to an ungrounded outlet. DO NOT use with extension cords or adapters that eliminate the connection to ground. The power strip is designed for indoor use only. Install the power strip away from heat emitting appliances such as radiators or heat registers. Do not install where excessive moisture or other conductive contaminants are present. Never install electrical wiring during a lightning storm.

Installation

1) Connect Your Power Strip to Your AC Power Line

Plug the power cord into a standard 3-wire grounded 120V AC 60 Hz outlet.

(Some states do not allow limitations on how long an implied warranty lasts, and some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This Warranty gives you specific legal rights, and you may have other rights which vary from jurisdiction to jurisdiction.)

To receive service under this warranty, you must be the original purchaser/user of the product in question. You must obtain a Returned Material Authorization (RMA) number from TRIPP LITE. Products must be returned to TRIPP LITE with transportation charges prepaid and must be accompanied by a brief description of the problem and proof of date and place of purchase.

2) Connect AC Equipment to Your Power Strip

Plug the AC power cords of your equipment into your power strip. Do not use extension cords or adapters that eliminate the connection to ground. DO NOT OVERLOAD your power strip. Each outlet can handle a load of up to the model’s amp rating, but do not exceed a total load of more than the model’s amp rating for all outlets.

3) Turn Power Switch ON

TRIPP LITE

1111 W. 35th St., Chicago, IL 60609 USA

WARNING: The individual user should take care to determine prior to use whether this device is suitable, adequate or safe for the use intended. Since individual applications are subject to great variation, the manufacturer makes no representation or warranty as to the suitability or fitness of these devices for any specific application.

Circuit Breaker

If the circuit breaker trips, outlets will cease to provide power. Reduce the load on the power strip down to your unit’s amp rating by unplugging excess equipment, then depress the circuit breaker button to reset and restore power. Models with power switches have either a separate circuit breaker or include the function of a circuit breaker in their power switches.

Lifetime Limited Warranty

The seller warrants this product, if used in accordance with all applicable instructions, to be free from original defects in material and workmanship for its lifetime. If the product should prove defective in material or workmanship within that period, Seller will repair or replace the product, in its sole discretion. Service under this Warranty can only be obtained by your delivering or shipping the product (with all shipping or delivery charges prepaid) to: Tripp Lite, 1111 W. 35th St., Chicago, IL 60609. Seller will pay return shipping charges.THIS WARRANTY DOES NOT APPLY TO NORMAL WEAR OR TO DAMAGE RESULTING FROM ACCIDENT, MISUSE, ABUSE OR NEGLECT. SELLER MAKES NO EXPRESS WARRANTIES OTHER THAN THE WARRANTY EXPRESSLY SET FORTH HEREIN. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ALL IMPLIED WARRANTIES, INCLUDING ALL WARRANTIES OF MERCHANTABILITY OR FITNESS, ARE LIMITED IN DURATION TO THE WARRANTY PERIOD SET FORTH ABOVE; AND THIS WARRANTY EXPRESSLY EXCLUDES ALL INCIDENTAL AND CONSEQUENTIAL DAMAGES.

WARRANTY REGISTRATION

Visit www.tripplite.com/warranty today to register the warranty for your new Tripp Lite product. You'll be automatically entered into a drawing for a chance to win a FREE Tripp Lite product!*

* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.

Regulatory Compliance Identification Numbers

For the purpose of regulatory compliance certifications and identification, your Tripp Lite product has been assigned a unique series number. The series number can be found on the product nameplate label, along with all required approval markings and information. When requesting compliance information for this product, always refer to the series number. The series number should not be confused with the marking name or model number of the product.

The policy of Tripp Lite is one of continuous improvement. Specifications are subject to change without notice.

Page 1
Image 1
Tripp Lite 200609062 important safety instructions Power It!TM, Power Strip, Installation, Circuit Breaker