Switches, Indicator Lights & Other Features continued

Other Features

9.DC Input Terminals (All models): The terminals’ lug screws secure the wires leading from your external battery or battery system. Your battery or battery system must provide your APS with proper DC voltage and your equipment with an adequate amp hour capacity. See Battery Selection section, pg. 8 for more information.

10.AC Receptacles: IEC 320 (Corded models only): These IEC receptacles allow you to connect equipment that would normally be plugged into a utility outlet. For other plug configurations, use an adapter that provides a connection to ground.

11.AC Input: IEC 320 (Corded models only): This IEC receptacle should be connected to a dedicated 15 Amp AC utility outlet via an adapter cord that provides a connection to ground. A detachable IEC to 5-15 cord is provided for this purpose. DO NOT plug the cord into the APS’s AC receptacles.

12.Hardwire AC Input/Output Terminal Strip (Hardwire models only): Use the lug screws on these terminals to secure hardwire connections for AC input and output. See pages 10 & 36 for wiring instructions.

13.Resettable Circuit Breakers (All models): These circuit breakers protect your APS against damage due to input or output overload. If a breaker trips, remove some of the load on the APS to prevent overload, then wait 1 minute to allow components to cool before resetting the circuit breaker.

14.Remote Module Connector (All models): The front panel of all models has an RJ45 receptacle for use with the optional remote module. (Module is included with all VR models.) See the installation instructions packed with the remote module.

15.Load Sense Potentiometer (All models): In order to save battery power, the APS’s inverter automatically shuts off when no load is connected. When the unit detects a load, it automatically turns the inverter on. Users may choose the minimum load the APS will detect by adjusting the Load Sense Potentiometer. Using a small tool, turn the potentiometer clockwise to lower the minimum load that will be detected, causing the inverter to turn on for smaller loads. When the potentiometer is turned fully clockwise, the inverter will operate even when there is no load. Turn the potentiometer counterclockwise to increase the minimum load that will be detected, causing the inverter to stay off until the new minimum load is reached. The factory setting for the potentiometer is fully clockwise, but in areas with frequent power interruptions, the potentiometer should be adjusted counterclockwise until the inverter is only in operation when the APS’s load is in use.

13

Page 12 Page 14
Page 13
Image 13
Tripp Lite 93-2007 (200106010) owner manual Other Features
Page 12 Page 14

93-2007 (200106010) specifications

Tripp Lite 93-2007 (200106010) is a high-quality audio-visual interface designed to facilitate seamless connection between various devices. This device is particularly popular in professional settings such as conference rooms, educational environments, and home theaters, where robust performance and unerring reliability are essential.

One of the primary features of the Tripp Lite 93-2007 is its extensive compatibility. The device supports a wide range of formats, making it suitable for use with multiple devices like projectors, televisions, and computer systems. Its ability to handle both analog and digital signals ensures users can enjoy exceptional audio and video quality without compromise.

Tripp Lite has engineered the 93-2007 with advanced technology that minimizes signal degradation. It employs high-quality shielding to protect against electromagnetic interference (EMI) and radio frequency interference (RFI). This shielding is vital for maintaining the integrity of signals over longer distances, making it suitable for setups in large venues where distance can impact performance.

The build quality of the Tripp Lite 93-2007 is noteworthy, with durable connectors that provide a secure fit and resist wear and tear over time. This longevity ensures that users will not have to frequently replace cables, creating a more efficient installation process. Moreover, the connectors are designed for easy plug-and-play functionality, allowing for quick setup and disconnection, ideal for fast-paced environments where time is critical.

Another key characteristic of the Tripp Lite 93-2007 is its ability to support high-definition resolutions. Whether you're working with 720p, 1080p, or even 4K content, this device guarantees sharp and clear imagery. As the demand for high-definition content continues to rise, having a reliable interface that can handle various resolutions is essential.

In addition to its performance, the Tripp Lite 93-2007 is engineered to be user-friendly. Its compact design allows for straightforward management of cables, reducing clutter. Moreover, it is compatible with various mounting systems, ensuring flexibility in installations.

The Tripp Lite 93-2007 (200106010) stands out as a versatile and reliable solution for audio-visual connectivity. Its comprehensive features, durable design, and high-quality performance make it an excellent choice for both professional and personal applications. Users can trust this device to deliver top-notch audio-visual experiences that meet the demands of modern technology.
Top Page Image Contents