Mounting

WARNING! Mount your Inverter/Charger BEFORE DC battery and AC power connection. Failure to follow these instructions may lead to personal injury and/or damage to the Inverter/Charger and connected systems.

Tripp Lite manufactures a variety of different Inverter/Chargers with a variety of different mounting options for use in vehicular or non-vehicular applications. Tripp Lite recommends permanent mounting of your Inverter/Charger in any of the configurations illustrated below. User must supply mounting hardware and is responsible for determining if the hardware and mounting surface are suitable to support the weight of the Inverter/Charger. Contact Tripp Lite if you require further assistance in mounting your Inverter/Charger.

Vehicular and Non-Vehicular Horizontal Mount

(612 models only)

AUsing the measurements from the diagram, install two user-sup- plied ¼" (6 mm) fasteners into a rigid horizontal surface, leaving the heads slightly raised. B Slide the Inverter/Charger back over the fasteners to engage the mounting slots molded on the bottom of the Inverter/Charger cabinet. C Install and tighten two user-sup- plied ¼" (6 mm) fasteners into the mounting feet molded on the front of the Inverter/Charger cabinet.

C

A

4½"

(11.4 cm)

 

B

 

6¾"

 

(17.1 cm)

 

7

27

6¾"

32"

(17.1 cm)

(20 cm)

 

Vehicular and Non-Vehicular

(All models except 612)

• Horizontal Mount • Vertical Mount • Inverted Mount

Tripp Lite’s Lateral Mounting Bracket (pre-installed on select models, but also available as an optional accessory from Tripp Lite*) provides a rigid surface for lateral mounting in vehicular or non-vehicular applications. Consult the instructions packed with the Lateral Mounting Bracket for complete mounting information. Note: only models RV2012OEM and RV3012OEM are covered under warranty for inverted mounting in a vehicular application. Such mounting may be possible with other models, however, when your Inverter/Charger is properly secured to a Lateral Mounting Bracket. As with any mounting, user is responsible for determining if the Inverter/Charger can be mounted safely relative to their application. Since securing an Inverter/Charger to a Lateral Mounting Bracket which is not factory pre-installed will require some modifications to the Inverter/Charger cabinet, please consult the Lateral Mounting Bracket owner’s manual (available online at www.tripplite.com) prior to purchasing.

* Contact Tripp Lite for ordering information.

Lateral Mounting Bracket

Vehicular and Non-Vehicular Horizontal Mount

(All models except 612)

AUsing the measurements from the diagram, install two user-sup- plied ¼" (6 mm) fasteners into a rigid horizontal surface, leaving the heads slightly raised. B Slide the Inverter/Charger forward over the fasteners to engage the mounting feet molded on the front of the Inverter/Charger cabinet. C Install and tighten two user-supplied ¼" (6 mm) fasteners into the mounting feet molded on the rear of the Inverter/Charger cabinet. The rear feet extend beyond the unit’s cabinet to provide for adequate ventilation space behind the cooling fan(s); they should not be removed.

C

"

" B

"

"

A

Note: RV model cabinets may have different front panel features, but all mount as per the figure above, or via the Lateral Mounting Bracket, illustrated at left.

103 "

(26.4 cm)

Note: Centers between front and back mounting holes is 12" (30.5 cm).

9R

Page 9
Image 9
Tripp Lite 200310080, 93-2182 owner manual Mounting, Vehicular and Non-Vehicular Horizontal Mount

200310080, 93-2182 specifications

Tripp Lite, a renowned leader in power protection and connectivity solutions, designs high-quality products tailored to meet the demands of businesses and individuals alike. Among their extensive catalog is the Tripp Lite 93-2182,200310080 model, a powerhouse of technological innovation and pragmatic design.

The Tripp Lite 93-2182 is a versatile power distribution unit (PDU) that is engineered to provide efficient and reliable power to multiple devices. With a rack-mountable design, it is ideal for data centers, server rooms, and any setup where space is at a premium. Its sleek form factor allows it to blend seamlessly into existing infrastructure while maximizing power delivery and minimizing clutter.

One of the standout features of this PDU is its combination of multiple output options, including various NEMA outlets to accommodate a wide range of devices. This makes it an excellent solution for environments with diverse equipment requirements. Users can connect servers, networking equipment, and other critical devices without the need for additional power strips, promoting a cleaner workspace and reduced risk of tripping hazards.

In terms of technology, the Tripp Lite 93-2182 is equipped with surge protection capabilities that shield connected equipment from voltage spikes. This protection is crucial in safeguarding sensitive electronics from potential damage. Additionally, the PDU features built-in circuit breakers which provide over-current protection, ensuring the safe operation of connected devices.

Another significant characteristic of this model is its robust monitoring capabilities. Some versions come with options to monitor power consumption, which can help users make informed decisions regarding load balancing and energy efficiency. Furthermore, comprehensive management features allow for efficient remote monitoring, enhancing control over power distribution across the network.

The durability of the Tripp Lite 93-2182 is also noteworthy. Constructed with high-quality materials, it is designed to withstand the rigors of a dynamic data environment. The attention to detail in its design ensures that it operates under various conditions while maintaining optimal performance.

In summary, the Tripp Lite 93-2182,200310080 represents a culmination of advanced engineering and practical design. With its versatile output options, surge protection features, and robust monitoring capabilities, it is a reliable choice for anyone looking to optimize their power distribution needs, particularly in tight spaces where efficiency is paramount.