Feature Identification
Identify the premium features on your specific model and quickly locate instructions on how to maximize their use.
1 Configuration DIP Switches: optimize Inverter/Charger operation depending on your application. See Configuration section for setting instructions.
2Operating Mode Switch: controls Inverter/Charger operation. The "AUTO/REMOTE" setting ensures your equipment receives constant, uninterrupted AC power. It also enables the Inverter/Charger to be remotely monitored and controlled with an optional remote module (Trip Lite model APSRM4, sold sep- arately). The "CHARGE ONLY" setting allows your batteries to return to full charge faster by turning the inverter off which halts battery discharging. The "DC OFF" setting
3"LINE", "INVERT", "LOAD" LEDs: show whether the Inverter/Charger is operating from AC line power or DC battery power. It also warns you if the connected equipment load is too high. See Operation section for instructions on reading the indi- cator lights.
4"BATT VOLTAGE" LEDs: these three lights will turn ON in several sequences to show approximate battery level. See Operation section for instructions on reading the indicator lights.
5DC Power Terminals: connect to your battery terminals. See Battery Connection section for instructions.
6Ground Fault Interrupter (GFI) AC Receptacles (not on hardwire models): allow you to connect equipment that would normally be plugged into a utility outlet. They feature ground fault interrupter switches that trip if there is excessive current on the ground safety wire.
7AC Input Cord (not on hardwire models): connects the Inverter/Charger to any source of utility- or
8 Hardwire AC Input/Output Terminals (not on corded models): securely connect the Inverter/Charger to vehicle or facility electrical system input and recommended GFCI receptacle output. See AC Input/Output Connection section for instructions.
9 Resettable Circuit Breakers: protect your Inverter/Charger against damage due to overload or charger failure. See Operation section for resetting instructions.
10Remote Control Module Connector: allows remote monitoring and control with an optional module (Tripp Lite model APSRM4, sold separately or included with select models). See remote module owner’s manual for connection instructions.
11Battery Charge Conserver (Load Sense) Dial: conserves bat- tery power by setting the
12Main Ground Lug: properly grounds the Inverter/Charger to vehicle grounding system or to earth ground. See Configuration section for instructions.
13
14Hardwire AC Input/Output Cover Plate
15Battery Temperature Sensing Connector: prolongs battery life by adjusting charge based on battery temperature. Use with cable (included on select models). See Configuration section for details.
16Automatic Generator Start Connector: automatically cycles gen- erator based on battery voltage (included on select models). Use with
17Ignition Interlock Control Jack (select models only): used to con- nect the inverter/charger to the vehicle ignition switch. Disables AC power outlet when the vehicle ignition switch is placed in the “Engine Run” position. See p. 8 for connection instructions.
13 | 1 | 4 | 10 | 3 | 2 | 11 | 13 | 1 | 4 | 10 | 3 | 2 | 11 |
| 15 |
| Side Mounted, |
15 | Not Shown |
|
Side Mounted, | 16 | |
Not Shown | ||
|
Side Mounted,
16 |
| Not Shown |
“FOR USE WITH COPPER WIRE ONLY” | ||
Side Mounted, | HOT IN |
|
Not Shown | NEUTRAL | IN |
9 | GROUND | IN |
|
| |
| GROUND | OUT |
6 | HOT OUT |
|
| NEUTRAL | OUT |
5 | 7 | 12† | 12 | 5 | 8 | 9 | 14 |
Front View (Corded Models)
† Select models includes | Front View (Single Input/Output Hardwire Models) |
|
17 |
Rear View |
3
