Tripp Lite Alternative Power Source owner manual Specifications Hardwired Models

Specifications (Hardwired Models)

HARDWIRED MODELS:	APS 1524	APS 2012
Weight:	26.4 lbs.	38.0 lbs.
INVERTER
Continuous power (@ 20° C):	1500 W	2000 W
Surge power (5 seconds):	3000 W	4000 W
Efficiency (Full Load):	89%	87%
Minimum DC Fuse Rating:	125A	500A
DC Input Current @ Nominal V DC
Full Load	70 A	192 A
No Load	1.3 A*	2.5 A*
Nominal Input Volts:	24 VDC	12 VDC
DC Input Voltage Range:	20-30 VDC	10-15 VDC
Nominal Output Volts:	120 VAC ±5%	120 VAC ±5%
Nominal Output Frequency:	60 Hz ±.3%	60 Hz ±.3%
BATTERY CHARGER
Charging Capacity DC:	10 A**	20 A**
Maximum Cable Length	7 ft.	1 ft.
Acceptance Volts VDC:	Selectable	Selectable
	28.8 V**/28.4 V Wet**/Gel	14.4 V**/14.2 V Wet**/Gel
Float Volts VDC (w/gel):	26.6 V (27.2 V)	13.3 V (13.6 V)
Input Voltage AC:	120 V	120 V
Input Current AC:	4.2 A**	4.2 A**
LINE VAC OPERATION
Minimum Input AC Volts:	Selectable 75**,85, 95, or 105 VAC	Selectable 75**,85, 95, or 105 VAC
Maximum Input AC Volts
(Continuous, Charger at Maximum):	Selectable 135* *or 145 VAC	Selectable 135** or 145 VAC
Maximum Input Current
(Continuous, Charger at Maximum):	26 A	29 A
Input Frequency:	60 Hz ±10%	60 Hz ±10%
Maximum Output AC (Continuous)	12.5 A	16.7 A
Automatic Transfer Time:	4-6 ms	4-6 ms

HARDWIRED MODELS (Cont.):	APS2424	APSVR3636
Weight:	41.0 lbs.	56.9 lbs.
INVERTER
Continuous power (@ 20° C):	2400 W	3600 W
Surge power (5 seconds):	4800 W	7200 W
Efficiency (Full Load):	89%	88%
Minimum DC Fuse Rating:	300A	300A
DC Input Current @ Nominal V DC
Full Load	112 A	114 A
No Load	1.5 A*	1.7 A*
Nominal Input Volts:	24 VDC	36 VDC
DC Input Voltage Range:	20-30 VDC	30-45 VDC
Nominal Output Volts:	120 VAC ±5%	120 VAC ±5%
Nominal Output Frequency:	60 Hz ±.3%	60 Hz ±.3%
BATTERY CHARGER
Charging Capacity DC:	30 A	30 A
Maximum Cable Length	3 ft.	4.5 ft.
Acceptance Volts VDC:	Selectable	Selectable
	28.8 V**/28.4 V Wet**/Gel	43.2 V**/42.6 V Wet**/Gel
Float Volts VDC (w/gel):	26.6 V (27.2 V)	39.9 V (40.8 V)
Input Voltage AC:	120 V	120 V
Input Current AC:	13.3 A	20 A
LINE VAC OPERATION
Minimum Input AC Volts:	Selectable 75**,85, 95, or 105 VAC	Selectable 75**,85, 95, or 105 VAC
Maximum Input AC Volts
(Continuous, Charger at Maximum):	Selectable 135** or 145 VAC	Selectable 135** or 145 VAC
Maximum Input Current
(Continuous, Charger at Maximum):	33 A	54 A***
Input Frequency:	60 Hz ±10%	60 Hz ±10%
Maximum Output AC (Continuous)	20 A	30 A
Automatic Transfer Time:	4-6 ms	4-6 ms

* Load sense can reduce this to 1/30 of the listed current. ** Factory default setting. *** When AVR is boosting incoming current.

17