Tripp Lite Audio/Video Pure Sine Wave UPS Systems owner manual Plug your equipment into your UPS

InstallationImporant (continued)Safety Instructions

Connection and Start-Up

1 Plug your UPS’s line cord into an electrical outlet.

Your UPS must be connected to a dedicated circuit of sufficient amperage. Note, however, that the select models may be fitted with different plug types. Refer to the “OP Rating/ Plug Rating” chart printed on the top of your UPS.

Once your UPS is plugged in, the fan and all Indicator Lights will turn ON. The “LINE” and “LOAD ACTIVE METER” LEDs will illuminate and the UPS will emit a beep to indicate normal operation. However, power is not supplied to your UPS’s AC outlets until the UPS is turned on.

2Plug your equipment into your UPS.

Your UPS is designed to support audio/video systems and their associated servers, Media Center PCs, and a Tripp Lite HT3100PC or HT7300PC Power Conditioning Center only. The total number of components connected should not exceed UPS capacity. This will overload your UPS system. You will also overload your UPS if you connect household appliances to the UPS's outlets.

3Turn your UPS ON:

•Press the “ON/TEST” Button

•Hold it for several seconds until you hear a beep

•Release it

Your UPS will begin providing AC power to its outlets.

The “ON LINE” LED will illuminate.

Optional Connections

Your UPS will function properly without these connections.

1Phone/Network Line Surge Suppression (Select Models)

These RJ-45 jacks protect connected equipment from surges on a phone or network line.* Using appropriate network cords, connect your wall jack to the UPS jack marked IN and your equipment to the UPS jack marked OUT. Make sure that the equipment you connect to the RJ-45 jacks is also protected on the AC power line.

* Not compatible with PoE (Power Over Ethernet) applications.

1 Your model may differ.

	CAU
	Risk of
	See top
2	Your model may differ.

3

CAUTION

Risk of electric shock

See top of unit for cautionary mar

1

4