Tripp Lite AV10IRG owner manual Save These Instructions, Important Safety Instructions, Features

Models: AV10IRG

1 6
Download 6 pages 61.67 Kb
Page 2
Image 2
SAVE THESE INSTRUCTIONS

Important Safety Instructions

SAVE THESE INSTRUCTIONS

CAUTION!

DO NOT connect to an ungrounded outlet. DO NOT use with 2-wire extension cords or adapters.This surge suppressor is designed for indoor use only. Install the surge suppressor away from heat-emitting appliances such as radiators or heat registers. Do not install where excessive moisture is present. Do not plug extension cords into the unit. Never install electrical, telephone, network or coaxial wiring during a lightning storm. Do not drill into any part of the housing or open the housing for any reason.There are no user-serviceable parts inside.

Features

A BC D

G HI

K

AIR RECEIVER

Receives the signal from your remote to power on the GREEN “Power Save” outlets.

BIR LED (Blue)

Indicates that a remote signal is being received.

CGROUNDED LED (Red)

Assures wall outlet is grounded and surge protection can function.

DLED PANEL

Shows real-time amperage readings for the 7 “Power Save” outlets helping avoid power overloads.

EPROTECTED LED (Green)

Assures surge protection is present. If this LED ever goes out,Tripp Lite will replace your surge suppressor under warranty at no charge!

FAC POWER LED (Red)

Indicates the ON/OFF status of the ECO-Surge Suppressor.

GCONVENIENT 8 FOOT SWIVELING POWER CORD Swivels on an angle to reach around corners or other obstacles to access distant outlets.

HHD 2.2 Ghz COAX JACKS (3 LINE)

Three sets of gold coaxial “F” connectors protect components on satellite, cable or antenna lines.

EFG

J

M L

I“ALWAYS ON” OUTLETS (3 with GREEN LEDs) Provide continuous power to devices like DVRs (TiVo®), cable and satellite boxes. LEDs illuminate to indicate power is present.

J“POWER SAVE” OUTLETS (7)

Have AC power cut to idle components, reducing energy waste (phantom loads) when turned off by GREEN “Power Save” technology—perfect for intermittent-use components like DVD players, gaming consoles, amplifiers and speaker systems.

KRESETTABLE CIRCUIT BREAKER

Protects the unit and your equipment against dangerous system overload.

LTEL/MODEM/NETWORK JACKS (1 Line)

Provide protection for Digital Video Recorders (TiVo) and other components on a single pay-per-view, dial-up or Ethernet line.

MIR EXTENSION JACK

Works with an optional cord and small receiver to extend your IR transmission distance. (Not included—go to www.tripplite.com for ordering details.)

2

Page 2
Image 2
Tripp Lite AV10IRG owner manual Save These Instructions, Important Safety Instructions, Features