Tripp Lite B006-VU4-R owner manual Lock, Scroll Lock

Hotkey Operation (continued)

Change Hotkey	Initiate Setting Mode by holding down the [Num Lock] key, pressing and
Mode Activation	releasing the minus [-] key, and releasing the [Num Lock] key. Once initiated,
Command	press [t] to switch to [Ctrl], [Ctrl]. When set at [Ctrl], [Ctrl], change the Hotkey
	Mode Activation Command back to [Scroll Lock], [Scroll Lock] by holding
	down the [Num Lock] key, pressing and releasing the minus [-] key, and then
	releasing the [Num Lock] key. Once initiated, press [t] to switch to [Scroll
	Lock], [Scroll Lock]
Change Port OS to	When a Mac computer is connected to the KVM, it may be necessary to change
Mac	this setting to ensure proper keyboard and mouse functionality. To change the
	port OS to Mac, initiate Setting Mode by holding down the [Num Lock] key,
	pressing and releasing the minus [-] key, and then releasing the [Num Lock]
	key. Once initiated, press [F2].
Change Port OS to	When a Sun computer is connected to the KVM, it may be necessary to change
Sun	this setting to ensure proper keyboard and mouse functionality. To change the
	port OS to Sun, initiate Setting Mode by holding down the [Num Lock] key,
	pressing and releasing the minus [-] key, and releasing the [Num Lock] key.
	Once initiated, press [F3].
Change Port OS to	By default, each Port OS is set at Windows. To change the port OS to Windows,
Windows	initiate Setting Mode by holding down the [Num Lock] key, pressing and
	releasing the minus [-] key, and releasing the [Num Lock] key. Once initiated,
	press [F10].
Turn Beeper On/Off	To turn the Beeper sound on or off when performing Hotkey and Setting
	Mode commands, initiate Setting Mode by holding down the [Num Lock] key,
	pressing and releasing the minus [-] key, and releasing the [Num Lock] key.
	Once initiated, press [b].
Keyboard/Mouse	If the keyboard and mouse are not responding normally, perform a Keyboard/
Reset	Mouse Reset: Initiate Setting Mode by holding down the [Num Lock] key,
	pressing and releasing the minus [-] key, and then releasing the [Num Lock]
	key. Once initiated, press [F5].
Show KVM	This command will display the Hotkey Activation Command, Setting Mode
Information	Activation Command and each port’s OS Setting in a Word document or
	spreadsheet. To display this information, open a blank document or spreadsheet.
	Initiate Setting Mode by holding down the [Num Lock] key, pressing and
	releasing the minus [-] key, and releasing the [Num Lock] key. Once initiated,
	press [F4].
Restore Default	This command restores the KVM’s Hotkey Activation Command, Setting Mode
Settings	Activation Command and each port’s OS Setting to the default value. To Re-
	store Default Settings, initiate Setting Mode by holding down the [Num Lock]
	key, pressing and releasing the minus [-] key, and releasing the [Num Lock] key.
	Once initiated, press [r], [Enter].

6