Tripp Lite B014-000 owner manual Administration, Introduction, General

Administration

Introduction

The administration utilities, represented by the icons located across the top of the B014-000 web page, are used to configure the B014-000 for operation.

As you make your configuration changes, click the Apply button at the left of the web page to save the changes in the B014-000's configuration file. To have the changes actually take effect, you have to put a check in the Reset on Exit box (see Customization, p. 14), and log out.

Note: 1. If you don't have Configuration privileges (see User Manager, p. 13), the Administration configuration dialogs are available for viewing only. All input fields are disabled, and cannot be changed.

2.All screen displays in this chapter are for example purposes. The actual screens that are displayed may vary slightly in appearance and wording.

General

The General panel displays three items of information about the B014-000's status. This is the same information that appears after you successfully log in from a browser:

An explanation of each of the fields is given in the table below:

Device Name	To make it easier to manage installations with more than one B014-000,
	each can be given a name. To assign a name, key in one here
	(15 characters max.).
MAC Address	The B014-000's MAC Address displays here.
Firmware Version	Indicates the B014-000's current firmware version level.

Note: New versions of the B014-000's firmware can be downloaded from our website as they become available, (see p. 14 for details).

9