1.. Product Overview
To set the IPv4 address via the local console OSD:
1.From the local console, press the left [Shift] key twice to open the OSD.
2.Press the [F2] key to open the Settings menu.
3.In the Settings menu, press the [Tab] key until the DHCP field is highlighted. Press the [Spacebar] key to toggle the DHCP field from Enabled to Disabled.
4.Pressing the [Tab] key to navigate to the additional fields, type in the desired IP Address, Subnet Mask, Gateway and DNS Server Address (optional).
5.Once the IP address is satisfactory, press the [Esc] key to save your changes. This will require that the KVM be rebooted to save the new settings.
To set the IPv6 address via the local console OSD:
1.From the local console, press the left [Shift] key twice to open the OSD.
2.Press the [F2] key to open the Settings menu, and then press the [F2] key again to open the IPv6 Settings menu.
3.In the IPv6 Settings menu, with the Mode field at the top of the screen highlighted, press the [Spacebar] key to toggle between DHCP, Stateless, and Static. DHCP is selected by default, and automatically assigns an IP address via the IPv6 DHCP server. Stateless is an option for networks with a compliant router that performs Stateless IPv6 configuration. Static allows you to manually assign an IP address.
4.Pressing the [Tab] key to navigate to the additional fields, type in the desired IP Address, Gateway, and DNS Server Address (optional). Note: DNS IP should be set to 0.0.0.0 to indicate no DNS.
5.Once the IP address is satisfactory, press the [Esc] key twice to exit and save your changes. This will require that the KVM be rebooted to save the new settings.
To set the IP address via the Web Configuration Interface:
Note:
•Before logging on the first time, verify that you have the latest Java installed on your computer (Java 1.6 or higher is required). If not, you can download and install Java from http://www.java.com/en/download/index.jsp.
•Only SSL connections are allowed, so you must start the IP address with HTTPS, not HTTP.
1.Open your web browser (see the Client Computer Compatibility section of this manual for browser support) and enter in the IP address of the KVM.
2.When logging into the KVM from your web browser, a Security Alert message appears to inform you that the device’s certificate is not trusted, and asks if you want to proceed. You have two options:
•If you are working on a computer other than your own, accept the certificate for just this session by clicking to proceed.
•If you are working at your own computer, install the certificate. Reference the instructions in the Security Certificate Installation section of this manual.
10
