Tripp Lite B070-016-19-IP To perform a firmware upgrade, follow these steps, Firmware Upgrade

2.. Web Configuration Interface

2..4..1 Firmware Upgrade

To perform a firmware upgrade, follow these steps:

Note: Depending on the type of firmware upgrade, the following settings may be erased: User settings, KVM switch settings, mouse and video adjustments, and RS232 settings. The network settings remain intact. For more information, refer to the firmware release notes.

1.Download the firmware upgrade file from www.tripplite.com/support.

2.Save the firmware upgrade file on the Client Computer.

3.Login to the Web Configuration Interface and navigate to the Configuration section. In the Configuration section’s toolbar, click on the

icon. The Device Firmware Upgrade page appears, displaying the current firmware version installed on the KVM.

4.In the Version to upgrade with field, browse to and select the firmware upgrade file that you just downloaded from the Tripp Lite website.

5.Verify that the firmware upgrade file is a newer version than what is currently installed on the KVM.

6.Click the Start Upgrade button to begin the firmware upgrade. A progress bar will display the progress of the upgrade. An upgrade can take several minutes.

7.When the upgrade completes, click the OK button on the prompt that appears to close out of the Web Configuration Interface and reboot the KVM. You will be taken back to the login page.

8.Click the Log On button to log back into the Web Configuration Interface.

17