Tripp Lite B119-003 owner manual Package Contents, Overview and Product Features, Troubleshooting

WARRANTY					for	Lite	Owner’s Manual
REGISTRATION				.com/warranty
	onlinea
			todayTripp
		FREE
Registerto .tripplite
	win
chance
product!	www
a

HDMI 3-to-1 Switch with Remote

Model: B119-003

Package Contents

•	B119-003 HDMI 3-to-1 Switch	•	Remote Control
•	Infrared Receiver	•	AC Adapter (100-240V), 5V 1A Output

• Owner's Manual

Overview and Product Features

The B119-003 HDMI 3-to-1 Switch with Remote enables you to select one of three HDMI sources to be displayed on a single HDMI monitor. Key product features are:

•	5V 1A power consumption	•	Signal rates up to 1.65 Gbps
•	UXGA display support	•	Pixel rates up to 165 MHz

Installation and Operation

Figure 1: Location of Input/Output Connections

1. Connect user-supplied HDMI cables between the HDMI sources and the B119-003 switch inputs marked INPUT A, INPUT B and INPUT C. (Figure 2)

Figure 2: Connection of HDMI Sources

2.Connect the HDMI cable between the HDMI display and B119-003 switch marked OUTPUT. Note: Make sure the HDMI Source is plugged into the INPUT port and the HDMI display is plugged into either OUTPUT port. (Figure 3)

Figure 3: Connection of HDMI Display

3.Connect the cord from the DC adapter to the DC 5V jack and plug it into a wall outlet. The front POWER LED will illuminate. (Figure 4)

Figure 4: Connection of DC Adapter

4.Turn on the power to your HDMI display before powering your HDMI sources.

Figure 5: Selecting an HDMI Source

5.Connect the Remote Host IR Receiver to the REMOTE INPUT on the back of the switch. You can use either the included hand-held remote control or the front SELECT button to toggle between HDMI sources. (Figure 5)

Troubleshooting

If you experience problems with your B119-003 switch, try the following remedies:

•Connect an HDMI cable directly between the source and the display to verify that the cable is operating. Repeat to test all cables.

•Once you confirm that all HDMI cables are functional, use two cables to test the ports on the

B119-003 switch. Plug one cable between the display and the OUTPUT port on the switch. Plug the second cable between INPUT A and the source. Repeat with INPUT B and INPUT C, using the same source. If all ports function, the B119-003 is operating properly. Note: To ensure that both sources and display function properly, the combined cable length should not exceed 5 meters.

•If the unit is plugged in and the Power LED is not lit, verify that the power supply is functioning. Use a voltmeter to measure the output of the DC adapter to verify that 5V is present. If output is 5V, the DC adapter is functional and the B119-003 switch has failed. Note: The positive (+) is in the middle of the plug and the ground (-) is on the exterior of the plug.

Tripp Lite World Headquarters

1111 W. 35th Street, Chicago, IL 60609 USA

Customer Support: (773) 869-1234 • www.tripplite.com

Figure 1.

Figure 2.

Figure 3.

Figure 4.

Figure 5.

Warranty & Warranty Registration on Page 4

Note: Follow these instructions and operating procedures to ensure correct performance and to prevent damage to this unit or to its connected devices.

Copyright © 2007 Tripp Lite. All rights reserved. All trademarks are the sole property of their respective owners.