Basic Operation continued

Other UPS Features

AC Receptacles: “UPS/Surge” receptacles are used to provide connected equipment with AC line power during normal operation and battery power during blackouts and brownouts. They also protect equipment against damaging surges and line noise. “Surge-Only” receptacles are used to provide peripherals with surge protection without committing precious battery power to support them during blackouts.

USB Communication Port: This port can connect the UPS to any computer for automatic file saves and unattended shutdown in the event of a power failure. Use with Tripp Lite's PowerAlert Software and USB cable. A USB cable is included with the UPS. PowerAlert Software is available FREE via the Web at www.tripplite.com/software/. NOTE: This connection is optional. The UPS will work properly without this connection.

Battery Replacement Door: Under normal conditions, the original battery in the UPS will last several years. Battery replacement should be performed only by qualified service personnel. Refer to “Battery Warnings” in the Safety section. Should the UPS require battery replacement, visit Tripp Lite on the Web at www.tripplite.com/support/ battery/index.cfm to locate the specific replacement battery for the UPS.

Power Sensitivity Adjustment: This dial is normally set fully counterclockwise, which enables the UPS to protect against waveform distortions in its AC input. When such distortions occur, the UPS will normally switch to providing sine wave power from its battery reserves for as long as the distortions are present. In some areas with poor utility power or where the UPS’s input power comes from a backup generator, frequent brownouts and/or chronic waveform distortion could cause the UPS to switch to battery too often, draining its battery reserves. It may be possible to reduce how often the UPS switches to battery due to waveform distortion or brownouts by experimenting with different settings for this dial. As the dial is turned clockwise, the UPS becomes more tolerant of variations in its input power’s AC waveform and switches to battery less often. NOTE: The further the dial is adjusted clockwise, the greater the degree of waveform distortion the UPS will allow to pass to connected equipment. When experimenting with different settings for this dial, operate connected equipment in a safe test mode so that the effect on the equipment of any waveform distortions in the UPS’s output can be evaluated without disrupting critical operations. The experiment should last long enough to assure that all expected line conditions are encountered.

6

201011083.indb 6

1/6/2011 9:00:19 AM

Page 5 Page 7
Page 6
Image 6
Tripp Lite BC600SINE owner manual Other UPS Features
Page 5 Page 7

BC600SINE specifications

The Tripp Lite BC600SINE is a compact and powerful battery backup system designed to provide dependable power protection for a variety of electronic devices. It is particularly well-suited for home and small office environments, where uninterrupted power supply is essential. With its advanced technologies and robust features, the BC600SINE stands out as an ideal solution for protecting sensitive equipment from power disturbances.

One of the main features of the BC600SINE is its pure sine wave output, which is critical for maintaining the performance and lifespan of connected devices. Unlike modified sine wave inverters, the pure sine wave technology delivers clean and stable power, mimicking the electrical characteristics of grid power. This makes the BC600SINE perfect for a wide range of electronics, including computers, printers, networking equipment, and gaming consoles.

With a capacity of 600VA and an output power of 360W, the BC600SINE can handle multiple devices simultaneously. Its compact design allows for easy placement in tight spaces without sacrificing performance. The unit is equipped with multiple outlets, providing several options for connecting devices. The battery backup functionality ensures that equipment remains operational during power outages, safeguarding data and preventing downtime.

The BC600SINE is built with a user-friendly LCD interface that displays essential information such as battery status, load levels, and input/output voltage. This feature allows users to monitor the performance of the unit in real-time, ensuring they are always informed about power conditions. Additionally, the unit offers surge protection to shield devices from voltage spikes and surges, which can occur during outages or storms.

Another notable characteristic of the Tripp Lite BC600SINE is its energy efficiency. The unit is designed to consume minimal power while in operation, helping users save on electricity bills. Its smart battery management system extends battery life by optimizing charging cycles and maintaining optimal battery health.

Overall, the Tripp Lite BC600SINE is a reliable and efficient power backup solution. Its pure sine wave output, user-friendly interface, and surge protection make it an ideal choice for those who prioritize equipment safety and operational continuity. Whether for critical work-from-home setups or sensitive electronic devices, the BC600SINE delivers the peace of mind that comes with knowing your power needs are met.
Top Page Image Contents