Connection continued

3Hardwire the transformer module to a utility

power source.

Pass a user-supplied cable through the box’s middle knockout F and connect it to the transformer module’s input terminals. Connect the other end of the cable to a utility power source. Replace the top of the boxes covering the power module’s and transformer module’s terminals.

4Select the transformer module’s input voltage.

Using a screwdriver, remove the panel covering the transformer module’s Input Voltage Select Switch G . Set the switch to match your facility’s input voltage. Then, use the power module’s front panel switches to configure input voltage on the LCD Display (see “Configure your UPS's input and output” in the “Power ON/OFF” section).

IMPORTANT NOTE: if your facility's input voltage is 200VAC, set the trans- former module’s switch to 240V AC, but configure the power module to 200V AC. If your facility’s input voltage is either 208V AC or 240V AC, the trans- former module and power module settings must match. The factory default settings for both modules is 208V. See chart below.

 

Transformer Module

Power Module

Your Facility’s

Input Voltage Setting

Input Voltage Setting

Input Voltage

(Rear Panel Switch)

(Front Panel Switches/LCD Display)

240V AC

240V AC

240V AC

208V AC

208V AC

208V AC

200V AC

240V AC

200V AC

5Connect the battery module to the power module.

Consult the owner’s manual that came with your battery module. Fully insert

the connector on the end of the battery module’s cable H into the connector on the rear panel of the power module I . Small sparks may occur; this is normal. NOTE: the power module does not contain internal batteries and will not supply power to connected equipment until a battery module is connected. The battery modules are fully charged prior to shipping. However, if the battery module has been stored for an extended period, after the UPS system is connected to a utility power source, allow the battery module to recharge for 12 hours. If needed, connect additional battery modules in a daisy-chain with each module’s cable inserted into the previous module’s connector J .

 

NORMAL

 

BY

 

PASS

3

F

 

NORMAL

240V AC

 

208V

AC

 

 

 

 

G

4

 

 

I

H

5J

16

Page 15 Page 17
Page 16
Image 16
Tripp Lite BP240V10RT-3U owner manual 240V AC
Page 15 Page 17

BP240V10RT-3U specifications

The Tripp Lite BP240V10RT-3U is a robust battery pack designed to extend the runtime of compatible Tripp Lite UPS systems. With an impressive construction and advanced features, it caters to users requiring reliable backup power for critical applications.

One of the standout features of the BP240V10RT-3U is its scalability. It can be connected with other compatible battery packs to expand backup capacity, delivering users the flexibility to customize their power solutions based on specific requirements. This makes it an excellent choice for both small businesses and enterprise-level environments.

The BP240V10RT-3U is equipped with 10U of rack space, making it suitable for standard 19-inch racks. This design enhances easy integration within existing setups, allowing users to optimize their server or network rooms without sacrificing vital space. The compact design, combined with its lightweight construction, ensures that installation and transport do not become cumbersome tasks.

In terms of power, the BP240V10RT-3U features a high-capacity 240-volt output, which ensures that it can support multiple devices simultaneously, providing ample backup for various applications, from servers to network equipment. The UPS systems that are compatible with this battery pack are known for their efficiency and ability to deliver consistent power, making the BP240V10RT-3U an essential companion for those systems.

The battery pack also features hot-swappable batteries, allowing users to replace the batteries without shutting down connected devices. This feature is crucial in mission-critical environments where uptime is essential. Maintenance becomes convenient and non-disruptive, enabling organizations to stay operational while ensuring their power sources are always in optimal condition.

For monitoring and management, the BP240V10RT-3U can integrate seamlessly with Tripp Lite’s software solutions, providing users with visibility into battery status and power conditions. This connectivity ensures that potential issues are addressed promptly, enhancing overall reliability.

With a combination of scalability, power output, and easy maintenance, the Tripp Lite BP240V10RT-3U stands out as a leading choice for those seeking an efficient and reliable expandable battery pack. Its features make it particularly appealing for businesses looking to safeguard their operations against power interruptions while maintaining a streamlined and organized infrastructure.
Top Page Image Contents