| Owner's Manual |
| BP48V60RT3U |
1111 W. 35th Street | 48 Volt DC Input/Output |
Chicago, IL 60609 USA | |
Customer Support: (773) | |
www.tripplite.com |
|
External Battery Pack
Español: p. 5Rack/Stack/Tower Mount
Français: p. 9
This manual contains important information regarding the safe installation and operation of the BP48V60RT3U Battery Pack. Please read this manual and save it for later reference.
INTRODUCTION
The Tripp Lite BP48V60RT3U External Battery Pack has an output voltage of 48 VDC and is designed for use with various Tripp Lite UPS systems equipped with 48 VDC external battery pack connectors. When used with appropriate Tripp Lite UPS systems, this Battery Pack meets UL standard 1778. The BP48V60RT3U may also be suitable for use with 48V DC input telecommunications equipment.
PACKING LIST
• | Battery Pack | • Screws |
• | 2 Mounting Ears | • Wing Bolts |
• 2 Adjustable Side Supports | • Locking Nuts | |
• | 2 Support Brackets | • Flat Washers |
SAFETY
•Use caution when lifting Battery Pack. Because of the Battery Pack’s considerable weight, at least two people should assist in lifting and installing it. If rackmounting the Battery Pack, mount it in the lowest rack space possible.
•Suggested mounting procedures are for common rack types and may not be appropriate for all rack configurations. User must determine the fitness of mounting hardware and procedures before mounting.
•When connecting multiple Battery Packs to a single UPS, the Battery Packs should be approximately the same age.
•It is normal for sparks to occur inside external battery connectors during final battery connection.
•Do not unplug external batteries from the UPS while the UPS is operating on battery power, due to the possibility of dangerous arcing.
•There are no
•Do not attempt to replace internal batteries.
Copyright © 2001 Tripp Lite. All rights reserved.
1
