SUGGESTED RACKMOUNT INSTALLATION FOR 2-POST ENCLOSURES
1)Attach the support brackets (A) to both rack posts (B) with
2)Attach mounting ears (D) to the mounting holes on the middle of the Battery Pack's sides (E), using the screws and washers provided (F). Do not attach the mounting ears to the Battery Pack's front mounting holes.
3)HaveoneormoreassistantslifttheBatteryPack and hold it in position until this step is complete. Insert the UPS into its intended rack space until the mounting surfaces of its ears meet the back of the rack's rails. Connect the mounting ears to the rails with two
BATTERY PACK
CONNECTION
To connect a single Battery Pack to a UPS: Insert the Battery Pack's power cable (A) into the external battery connector of your UPS. (See your UPS owner's manual for external battery connector description and location.)
To connect multiple Battery Packs to a UPS: For
greatly increased runtime, connect the power cable of one Battery Pack to the UPS's external battery connector as outlined above, then "daisy chain" moreBatteryPacksontothefirst.Connectthepower cable of the second Battery Pack to the first Battery Pack's external battery connector (B), the cable on third to the connector on the second and so on. Note thatmultipleBatteryPackarrayswillprovidelonger runtimes,butwillalsorequirelongerrechargetimes.
| B |
|
|
| A |
C |
| Figure 1 |
|
| |
E |
|
|
Figure 2 | D | F |
G |
|
|
Figure 3 |
|
|
|
| A |
|
| B |
Battery Connection
3