2
Color Selection (BP48V24-2U Only)
The BP4824-2U can be configured to match black or grey equipment. To match grey equipment, mount
the grey mounting ears in front. To match black equipment, switch the grey front panel on the unit for the
black front panel included, and mount the black mounting ears in front. (See mounting instructions for exact
mounting ear placement.)
SUGGESTED RACKMOUNT INSTALLATIONFOR 4-POST ENCLOSURES
1) Measure the depth of your rack from the outside surface of the front mounting rail to the outside surface
of the rear mounting rail.
2) On both sides of your Battery Pack, connect
both front mounting ears (A) with four screws
and flat washers each (B) so their mounting
surfaces are even with the front of your Battery
Pack's metal case. Connect the mounting ex-
tensions (C) to the Battery Pack using four
screws and flat washers (D) each. Connect the
rear mounting ears (E) to the mounting exten-
sion using four wing bolts and flat washers (F)
and locking nuts (G) each—the wing bolts
should be left only finger-tight so that they may
be adjusted later. Adjust the mounting exten-
sions and rear mounting ears so that the dis-
tance from the front mounting ears to rear
mounting ears matches the depth of your rack.
3) Have one or more assistants lift the Battery
Pack and hold it in position until this step is
complete. Insert the Battery Pack into its in-
tended rack space, pressing its rear mounting
ears (H) inward so that they fit past the rack's
front (J) and rear (K) mounting rails, until the
mounting surfaces of the front ears (L) meet the
outside of the rack's front rails. Adjust the rear
mounting ear until the mounting surface of the rear ears meet the outside of the rear rails, then tighten
the wing bolts holding the mounting ears to the mounting extensions. Connect the front mounting
ears of the Battery Pack to the rack's front mounting rails with two screws and flat washers (M, user
supplied: match to the rails' threads) on each side. Connect the rear mounting ears to the rear mounting
rails of the rack with two screws and flat washers (N, user supplied: match to the rails' threads) on
each side.
200005167 Rackmount Battery Pack Manual (Revised).p65 8/15/00, 12:50 PM2