1111 W. 35th Street
Chicago, IL 60609 USA
Customer Support: (773)
www.tripplite.com
Owner's Manual
Isobar® , Isobar® Ultra, Isotel® & Isotel® Ultra
Premium Surge Suppressors (120V)
ESPAÑOL : p. 5
FRANÇAIS : p. 9
Safety
•Install your surge suppressor indoors, away from excess moisture, heat and dust.
•Connect your surge suppressor to a
•Your surge suppressor does not require maintenance. Do not open your surge suppressor for any reason. There are no
Quick Installation
1 Plug surge suppressor into a three- wire, grounded 120V electrical outlet.
The surge suppressor cannot provide full protection unless it is plugged into a properly wired and grounded outlet.
2 Flip surge suppressor’s ON – OFF
switch ON (switch will light up.)
When this switch is lit, it indicates that AC power is enabled at the surge suppressor's outlets.
3 Plug the power cords of your electrical equipment into your surge suppressor's outlets.
Your electrical equipment is now protected from AC surges on the power line. Note for models with more than 2 outlets: the outlets are arranged into pairs called isolated filter banks. For best results, plug heavy power draw devices such as printers into the banks closest to the surge suppressor's power cord and sensitive equipment such as computers into the banks furthest from the surge suppressor's power cord. This gives sensitive equipment the greatest protection from AC surges and isolates it from line noise from heavy power draw devices.
Copyright © 1999 Tripp Lite. All rights reserved. Isobar® and Isotel® are registered trademarks of Tripp Lite. | 1 |