Tripp Lite Isobar, Isotel Ultra Specifications, All Models, FCC PART 68 NOTICE U.S. ONLY

Specifications

	Isobar 2-6	Isobar 4	Isobar 6	Isobar 8 RM
AC Energy Absorption (Joules):	600	2200	2350	2350
Amp Spike Protection (Amps):	48,000	85,000	97,000	97,000
Dimensions (H x W x D):	2½ x 5 x 3½"	2½ x 6 x 3½"	2½ x 7 x 3½"	2½ x 9½ x 3½"

	Isobar 4 Ultra	Isobar 6 Ultra	Isobar 8 Ultra	Isotel
AC Energy Absorption (Joules):	2200	2350	2350	2700
Amp Spike Protection (Amps):	85,000	97,000	97,000	92,000
Dimensions (H x W x D):	2½ x 6 x 3½"	2½ x 7 x 3½"	2½ x 9 x 3½"	2½ x 6 x 3½"

	Isotel 4 Ultra	Isotel 6 Ultra	Isotel 8 Ultra Multimedia
AC Energy Absorption (Joules):	2700	2850	2850
Amp Spike Protection (Amps):	92,000	92,000	97,000
Dimensions (H x W x D):	2½ x 6 x 3½"	2½ x 7 x 3½"	2½ x 9 x 3½"

ALL MODELS:

•UL 1449 Listed (330V let-through, 1998)

•UL 1283 Listed (noise reduction)

Rated Input Voltage:	105 to 135V AC; 60 Hz; (120V AC nominal)
AC Outlets:	NEMA 5-15R
AC Line Cord:	6', 14 gauge, 3-conductor grounded
	(12' on Isobar 8 Ultra, Isotel 8 Ultra Multimedia
	and Isobar 8 RM models)
Controls:	Illuminated RED "ON/OFF" switch
	(Remote "ON/OFF" switch with 7' cord on Isobar 8 RM)
High Frequency Noise Suppression:	> 20db @ 50Khz
	> 40db @ 500Khz
	> 75db @ 1Mhz
	> 30db @ 6-1000Mhz
Transient Response Time:	Instantaneous*

*Transient amplitude reduction occurs faster than the clamp response of the varistors because of the high rejection rate of the ISOBAR/ISOTEL filter networks.

TELEPHONE SURGE PROTECTION (ISOTEL AND ISOTEL ULTRA MODELS ONLY):

• UL 497A Listed (secondary communications protection)

Peak Transient Input Voltage:	6Kv, 10 microseconds
Energy Absorbtion:	140 Joules
Response Time:	Less than 5 nanoseconds
Clamping Voltage:	235 peak, ±10%
EMI Noise Reduction:	Up to 27 db
Input/Output Connector:	Female RJ11 jack; 2-wire, single line protection)
	(Isotel 6 Ultra features 4-wire, 2-line protection)

FCC PART 68 NOTICE (U.S. ONLY)

IfyourIsotelorIsotelUltracausesharmtothetelephonenetwork,thetelephonecompanymaytemporarilydiscontinueyourservice.Ifpossible, they will notify you in advance. If advance notice isn’t practical, you will be notified as soon as possible. You will be advised of your right to file a complaint with the FCC. Your telephone company may make changes in its facilities, equipment, operations or procedures that could affect the proper operation of your equipment. If it does, you will be given advance notice to give you an opportunity to maintain uninterrupted service. If you experience trouble with this equipment, Isotel or Isotel Ultra, please contact the Manager of Technical Support; Tripp Lite; 1111 W. 35th Street, Chicago, Illinois 60609; Phone: (773) 869-1234, for repair/warranty information. The telephone company may ask you to disconnect this equipment from the network until the problem has been corrected or you are sure the equipment is not malfunctioning. There are no repairs that can be made by the customer to the Isotel or Isotel Ultra. This equipment may not be used on coin service provided by the telephone company. Connection to party lines is subject to state tariffs. (Contact your state public utility commission or corporation commission for information.)

3