200206186 SmartPro XL Owner’s Manual 93-2078.qxd 7/30/02 5:07 PM Page 8

Storage & Service

Storage

All connected equipment should be turned off, then disconnected from the UPS to avoid battery drain. Unplug your UPS from its AC receptacle, then press and hold its ON/OFF button to deactivate it. Your UPS is now ready for storage. If you plan on storing your UPS for an extended period of time, fully recharge the UPS batteries once every three months by plugging the UPS into a live AC outlet and letting the UPS charge for 4 to 6 hours. If you leave your UPS batteries discharged for an extended period of time, they will suffer a permanent loss of capacity.

Service

If returning your UPS for service, contact your local Tripp Lite dealer or distributor. They will refer you to a service center. Please carefully pack the UPS using the ORIGINAL PACKING MATERIAL that came with the unit. Enclose a letter describing the symptoms of the problem. If the UPS is within the warranty period, enclose a copy of your sales receipt.

Specifications

Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice.

Model:

SMART700

SMART750XL

SMART1050

Series:

AGSM1050PJR3

AGSM1500XPSR3

AGSM1050PJR3

Input Voltage/Frequency:

120V/60 Hz

120V/60 Hz

120V/60 Hz

Output Capacity (VA/Watts):

700/600

750/600

1050/800

Battery Runtime

 

 

 

(Half Load/Full Load) Minutes:

20/6

42/18*

23/8

Battery Recharge Time:

2-4 hrs.

2-4 hrs.*

2-4 hrs.

Approvals:

UL, cUL, NOM, FCC B

UL, cUL, NOM, FCC A

UL, cUL, NOM, FCC B

Model:

SMART1050XL

SMART1500

SMART1500XL

Series:

AGSM1500XPSR3

AGSM1500XPSR3

AGSM1500XPSR3

Input Voltage/Frequency:

120V/60 Hz

120V/60 Hz

120V/60 Hz

Output Capacity (VA/Watts):

1050/800

1500/980

1500/980

Battery Runtime

 

 

 

(Half Load/Full Load) Minutes:

26/6*

20/7

20/7*

Battery Recharge Time:

2-4 hrs.*

2-4 hrs.

2-4 hrs.*

Approvals:

UL, cUL, NOM, FCC A

UL, cUL, NOM, FCC A

UL, cUL, NOM, FCC A

*External battery packs can be connected to these models. External battery packs will increase both the battery runtime and the battery recharge time.

ALL UNITS:

Output Waveform Line Mode (filtered sinewave); Output Waveform Battery Mode (PWM sine wave); AC Surge Suppression (exceeds IEEE 587 Cat. A & B standards); AC Noise Attenuation (>40 dB at 1MHz); AC Protection Modes (H to N, H to G, N to G); Tripp Lite External Battery Model (BP36V27).

FCC CLASS A RADIO/TV INTERFERENCE NOTICE:

Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when operated in a com- mercial environment. This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instruction manual, may cause interference to radio communications. Operation of this equipment is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. The user must use shielded cables and connectors with this product. Any changes or modifications to this product not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

FCC CLASS B RADIO/TV INTERFERENCE NOTICE:

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instruction manual, may cause interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference using one or more of the following measures: reorient or relocate the receiving antenna; increase the separation between the equipment and the receiver; connect the equipment into an outlet on a circuit different from that which the receiver is connected; consult the dealer or an expe- rienced radio/television technician for help. The user must use shielded cables and connectors with this product. Any changes or modifications to this product not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

8

Page 8
Image 8
Tripp Lite Power Suppy owner manual Storage, Service

Power Suppy specifications

Tripp Lite is a renowned manufacturer of power protection and connectivity solutions, recognized especially for its high-quality power supplies. Their power supplies are designed to meet the needs of both consumers and businesses, ensuring stable and reliable power delivery.

One of the main features of Tripp Lite power supplies is their high efficiency. Many models are designed to meet or exceed the 80 PLUS certification, ensuring that they convert more than 80% of the incoming power into usable output while producing less heat. This efficiency not only helps in reducing energy costs but also contributes to a longer lifespan for the devices connected to the power supply.

Another significant characteristic is the protection mechanisms incorporated into Tripp Lite power supplies. They typically come equipped with features like overload protection, short circuit protection, and surge protection. This guarantees that both the power supply and connected devices are safeguarded against unexpected power surges, voltage spikes, and other electrical anomalies.

Tripp Lite also emphasizes versatility in its power supply offerings. Many models come with modular designs, enabling users to customize cable management according to their specific needs. Modular power supplies allow users to connect only the cables they require, promoting better airflow within the case, and making installations cleaner and more efficient.

Moreover, Tripp Lite power supplies are known for their robust build quality. They are often constructed with durable materials and include features such as silent operation and efficient cooling systems with strategically placed fans. This ensures that the power supply operates quietly while maintaining optimal temperatures during heavy loads.

In terms of technology, Tripp Lite incorporates advanced power management systems in their supplies. This includes features like Active PFC (Power Factor Correction), which enhances power efficiency, reduces energy costs, and ensures compatibility with a wide range of devices.

Finally, Tripp Lite offers a comprehensive warranty on its power supplies, reflecting the company's confidence in the reliability and performance of its products. This level of assurance provides peace of mind for consumers and businesses alike in choosing Tripp Lite as their power supply provider.

In summary, Tripp Lite power supplies are characterized by their high efficiency, robust protection mechanisms, modular designs, and advanced technologies, making them a popular choice for users who prioritize reliability and performance in their power solutions.