Tripp Lite PV1000HF, PV1800HF, PV3000HF owner manual Feature Identification, PV1000HF Rear Panel

Feature Identification

Identify the premium features on your specific model and quickly locate instructions on how to maximize their use.

1Operating Mode Switch: controls Inverter operation. Set this 3-position rocker switch to “ON” to have your Inverter provide connected equipment with AC power by converting DC power from an attached battery. Set switch to “OFF” when not using connected equipment to prevent battery drain. Set switch to “REMOTE” to remotely monitor and control the Inverter with the use of an optional remote module.

2“LOAD” Indicator Lights: intuitive “traffic light” signals show approximate equipment load level. See page 4 for instructions on reading indicator lights.

3“BATTERY” Indicator Lights: intuitive “traffic light” signals show approximate charge level of your battery. See page 4 for instructions on reading indicator lights.

4DC Power Terminals: connect to your battery terminals. See page 7 for connection instructions.

5AC Receptacles: allow you to connect equipment that would normally be plugged into a utility outlet. PV3000HF models include two receptacles that accept either 15- or 20-amp plugs.

6Resettable Circuit Breaker(s): protect your Inverter against damage due to overload. PV3000HF models include two separate 20-amp circuits. See page 4 for resetting instructions.

7Remote Control Module Connector: allows remote monitoring and control with an optional module (Tripp Lite model APSRM4, sold separately or included with PV3000HF models). See remote module owner’s manual for connection instructions.

8Battery Charge Conserver (Load Sense) Dial: conserves battery power by setting the low-load level at which the Inverter auto- matically shuts off. See page 4 for setting instructions.

9Multi-Speed Cooling Fan(s): quiet, efficient fans prolong equipment service life.

10Main Ground Lug: properly grounds the Inverter to vehicle grounding system or earth ground. See page 7 for connection instructions.

Low Battery Alarm/Shutdown (internal, not shown): auto- matically detects low voltage and shuts down Inverter to preserve vehicle battery.

Overload Alarm/Shutdown (internal, not shown): automatically detects wattage overload on Inverter outlets and shuts down Inverter as a protective measure.

12V DC CAUTION! Observe proper polarity. Reversed polarity will blow internal fuses. See manual.

PV1000HF Rear Panel 4 9 4

12V DC CAUTION! Observe proper polarity. Reversed polarity will blow internal fuses. See manual.

4 9 4

PV1800HF Rear Panel

CAUTION! Observe proper polarity. Reversed polarity will blow internal fuses. See manual.

12V DC

9 4 9

PV3000HF Rear Panel

8 3 7 2 1

	LOAD	BATTERY		LOAD
	SENSE
GREATER	LESSER	HI	REMOTE	LOW
		MED		MED
LOAD	LOAD	LOW		HI	REMOTE	OFF	ON
ON	ON

GROUND

PV1000HF Front Panel			5				10
	8	3		7	2	1

	LOAD	BATTERY		LOAD
	SENSE
GREATER	LESSER	HI	REMOTE	LOW
		MED		MED
LOAD	LOAD	LOW		HI	REMOTE	OFF	ON
ON	ON

GROUND

PV1800HF Front Panel 5 10

5 8 3 7 2 1 5

20A 15A 15A 20A

LOAD	BATTERY	LOAD
SENSE

	GREATER			LESSER	HI	REMOTE	LOW
		LOAD		LOAD	MED		MED	REMOTE	OFF	ON
			ON	ON	LOW		HI
OUTPUT
											OUTPUT
CIRCUIT											CIRCUIT
BREAKER											BREAKER
20A											20A

GROUND

610

PV3000HF Front Panel

3PV