Tripp Lite RV1512UL Battery, Leds Alarms & Switches, Surge / Noise Suppression, Physical

Input connection type

Input cord length

Recommended Electrical Service

Maximum input amps / watts

BATTERY

DC INPUT: Set of 2 DC bolt-down terminals. AC INPUT: hardwire

DC INPUT: User supplies cabling. 0 gauge or larger (see manual). AC INPUT: hardwire

DC INPUT: Requires 12V DC input source capable of delivering 145A for the required duration (when used at full continuous capacity - DC requirements increase during Over-Power and Double-Boost operation). For automotive applications, professional hardwire

DC INPUT: Full continuous load - 145A at 12V DC. AC INPUT: 35 amps at 120V AC with full inverter and charger load (15A max charger-only / combined input load to support charger and AC output is automatically controllable to 66%-33%-0% based on AC output l

Expandable battery runtime

DC system voltage

Battery recharge rate

Runtime is expandable with any number of user supplied wet or gel type batteries

12V

19A / 75A (selectable)

LEDS ALARMS & SWITCHES

Front panel LEDs

Switches

Set of 6 LEDs offer continuous status information on load percentage (6 levels reported) and battery charge level (7 levels reported). See manual for sequences.

3-position on/off/remote switch enables simple on/off power control plus auto/remote setting that enables distant on/off control of the inverter system when used in conjunction with APSRM4 accessory (sold separately) in inverter mode. In AC uninterruptibl

SURGE / NOISE SUPPRESSION

AC surge	450 joules AC surge suppression included
suppression
PHYSICAL
Shipping weight (lbs)	44.6
Shipping weight (kg)	20.2
Shipping	13.5 x 15 x 21.5
Dimensions (HWD/in)
Shipping	34.3 x 38.1 x 54.6
Dimensions
(HWD/cm)
Unit weight (lbs)	40.2
Unit weight (kg)	18.3
Unit Dimensions	7.25 x 8.5 x 17
(HWD/in)
Unit Dimensions	43.8 x 21.6 x 41.3
(HWD/cm)
Material of	Polycarbonate
construction
Form factors	Mounting slots enable permanent placement of inverter on any horizontal surface (see manual for additional mounting
supported	information)
Cooling method	Multi-speed fan
Style	Heavy-duty with built-in battery charger
ENVIRONMENTAL
Relative Humidity	0-95% non-condensing

LINE / BATTERY TRANSFER

Transfer time from line power to battery mode

Low voltage transfer to battery power

16.6milliseconds (typical - compatible with many computers - verify transfer time compatibility of loads for UPS applications)

In AC "auto" mode, inverter/charger switches to battery mode as line voltage drops to 75V (user adjustable to 85, 95, 105V - see manual)