Tripp Lite SMART1500SLTXL warranty Leds Alarms & Switches, Surge / Noise Suppression, Physical

Voltage regulation description

Overvoltage correction

Brownout correction

Automatic voltage regulation (AVR) circuits maintain clean, regulated computer-grade 120V nominal output, without using battery power, during brownouts to 95V and overvoltages to 145V

At 120V, input voltages between 127-145V are reduced by 12%

At 120V, input voltages between 95-108V are boosted by 14%

LEDS ALARMS & SWITCHES

Front panel LEDs

Alarms

Switches

Includes 10 front panel LEDs to indicate line/battery power status, over/undervoltage correction, battery charge level, load percentage, overload and replace battery

Audible alarms indicate BATTERY MODE and OVERLOAD, UPS POWERED ON

2 front panel mounted switches. POWER ON switch powers UPS on in AC or battery mode when pressed longer than one second. POWER ON switch also initiates self-test when pressed longer than .5 seconds with the UPS in line power mode. Also serves as an alarm

SURGE / NOISE SUPPRESSION

AC surge	738 joules
suppression
AC suppression	Instantaneous
response time
Dataline suppression	Includes 8-wire RJ45 style jack; pins 1,2,3 & 6 offer 10baseT Ethernet line surge suppression with 7.5V clamping, pins 4
	& 5 offer single-line tel/DSL line suppression starting at 260V. (POE Compatible)
EMI / RFI AC noise	Yes
suppression
PHYSICAL
Shipping weight (lbs)	47.7
Shipping weight (kg)	21.5
Shipping	14 x 9.8 x 18.3
Dimensions
(HWD/in)

Shipping Dimensions (HWD/cm)

35.6 x 24.9 x 46.5

Unit weight (lbs)	44.6
Unit weight (kg)	20.1
Unit Dimensions	10.1 x 6.65 x 13.75
(HWD/in)
Unit Dimensions	25.7 x 16.9 x 35
(HWD/cm)
Material of	Steel
construction
Form factors	Tower
supported
Cooling method	Fan
Battery Access	Supports battery access and hot-swap replacement without powering off connected equipment
ENVIRONMENTAL
Relative Humidity	0 to 95%, non-condensing
COMMUNICATIONS
Network monitoring	2 built-in monitoring ports: 1 x USB and 1 x DB9. Each supports on battery, low battery, power restored, AC line
port	voltage, DC battery voltage, load percentage, battery charge current, battery capacity, temperature and line frequency
	status messaging.
Software and	PowerAlert UPS monitoring software for all common network and standalone operating systems. Ships with 2 cables: 1
cabling included	x USB and 1 x DB9

SNMP compatibility

SNMP adapter accessory #SNMPWEBCARD