4.Enclosure Installation (continued)
4.4Ground Connection
All parts of the enclosure are grounded to the frame of the enclosure. Use the enclosure’s front or rear threaded grounding point A and an M6 screw (included) to connect the frame of the enclosure directly to your facility’s earth ground connection with an 8 AWG (3.264 mm) wire. Route the ground wire under the enclosure’s frame to ensure unhindered door operation. Warning: Attach each enclosure to earth ground separately. Do not use the enclosure without an earth ground connection.
A |
EARTH |
GROUND |
5. Enclosure Configuration
Before installation, be sure to plan the location and arrangement of components within the enclosure. Be sure all mounting rails are reversed or adjusted for depth, depending on your equipment configuration.
5.1 Door Locks
All enclosure doors (including front and back doors, as well as both side panels) have locks that are accessible by included keys.
5.2 Cable Access and Management
The back door of the enclosure has a square opening for cable access and management. An additonal opening can be found on top of the main cabinet. Each opening can also be closed by screwing in the removeable cable access panels.
5.3 Reversing the Enclosure
In order to accommodate various rack configurations, the enclosure can be reversed. To do so, simply turn the enclosure over so that the doors open in the opposite direction.
5
