Tripp Lite SRCOOL12K, SRXCOOL12K owner manual Installation continued, 3Exhaust Duct Connection

Installation (continued)

2-3Connect the flexible cooling duct (shorter tube A ) to the cooling duct adapter B . Align the duct with the circular adapter opening, push the duct downward and turn the duct clockwise until it screws into the adapter solidly.

2-3

2-4Place the other end of the cooling duct near the air intake of the target device or rack enclosure, using the straightest, shortest path available. If you plan to cool a rack enclosure, place the end of the cooling duct over a perforated area near the top of the enclosure’s front door (or near the top of the bank of equipment that requires cooling). Cool air will sink and spread across the air intakes at the front of the rack enclosure.

2-4

3Exhaust Duct Connection

3-1Connect the flexible exhaust duct (longer tube A ) to the warm air exhaust vent on the rear panel of the unit B . Align the duct with the circular vent opening, push the duct inward and turn the duct clockwise until it screws into the exhaust vent solidly.

A

1

B 2

A

1 B

2

3-2Connect the other end of the exhaust duct A to the exhaust duct adapter B . Align the duct with the circular adapter opening, push the duct inward and turn the duct clockwise until it screws into the adapter solidly.

If you plan to connect the exhaust duct to a drop ceiling, proceed to step 4 . If you plan to connect the exhaust duct to a window, proceed to step 5 .

3-1

1

A

3-2

B

2

5