UPS input connection type
UPS input connection description
Hardwire
3 wire single phase input (L1, L2, G)
Recommended Electrical Service
Phase
BATTERY
120A @
Full load runtime (minutes)
Half load runtime (minutes)
Expandable battery runtime
External battery pack compatibility
Expandable runtime description
DC system voltage (VDC)
Battery recharge rate (included batteries)
4.3minutes (18,000 watts)
12.5minutes (9000 watts)
Runtime is expandable with external battery packs
BP240V10RT3U;
For best results, add external batteries in multiples of two so that both included 10kVA power modules have an equal number and type of connected battery packs
240
Less than 8 hours from 10% to 90%
Battery replacement description
VOLTAGE REGULATION
Voltage regulation description
Overvoltage correction
Undervoltage correction
2% output voltage regulation in standard online,
Corrects overvoltages up to 300V
Corrects undervoltages as low as 100V
LEDS ALARMS & SWITCHES
LED Indicators
Front panel LCD display
Alarms
Alarm cancel operation
Switches
6 LEDs indicate line power, online mode, economy/bypass mode,
Selectable LCD display with scroll and selection buttons enables UPS control and detailed monitoring options; LED/LCD panel rotates for viewing in rack/tower formats; LCD Display supports ENGLISH, FRENCH, GERMAN, ITALIAN, SPANISH and PORTUGUESE (see manual)
Unique audible alarms for all major UPS, environmental and power conditions (see manual)
Alarm cancel switch
2 Switches control off/on power status and
SURGE / NOISE SUPPRESSION
UPS AC suppression response time
Instantaneous
