Tripp Lite SU20KRTHW manual Specifications, Output kVA capacity kVA, Input

SNMP-enabled UPS, PDU and other networking devices

Optional 2POSTRMKITHD supports installation in 2 post 19 inch racks (4 required)

Optional 2-9USTAND supports upright tower placement (2 required)

Supports Emergency Power Off (EPO) via built-in interface

Front panel LEDs and LCD readout with scroll controls

LED / LCD display panel rotates for viewing in rackmount or tower configurations

External battery packs are field replaceable and hot swappable

Frequency conversion mode enables conversion of 60Hz to 50Hz or 50Hz to 60Hz (no de-rating)

Specifications

OUTPUT

Output Volt Amp Capacity (VA)

Output kVA capacity (kVA)

Output Watt Capacity (watts)

Output kW capacity

Output power factor

Output Capacity Details

Nominal Output Voltage(s) Supported

Nominal Voltage details

Frequency compatibility

Frequency compatibility details

Output voltage regulation (line mode)

20000

20

18000

18

0.9

Supports up to 105% load continuously in double conversion mode, 106 to 125% for 1 minute, 126% to 150% for 30 seconds; Loads over 150% trigger immediate bypass mode operation to support loads directly from mains power; Double conversion mode is automatically restored as load levels are reduced to 95% or less

200V; 208V; 220V; 230V; 240V

Voltage selection via front panel LCD interface

50 / 60 Hz; Supports 50 to 60 Hz and 60 to 50 Hz conversion

Output frequency matches input nominal on startup; Frequency conversion mode enables conversion of 60Hz to 50Hz or 50Hz to 60Hz (no de-rating)

+/- 2%

Output voltage regulation (Economy line mode)

+/- 10%

Output voltage regulation (Battery mode)

+/- 2%

Built-in UPS output receptacles

Output AC waveform (AC mode)

Output AC waveform (battery mode)

INPUT

Hardwire

Sine wave

Pure Sine wave

Rated input current (at maximum load)

Nominal Input Voltage(s) Supported

112.2A (200V), 108A (208V), 102A (220V), 97.6A (230V), 93.6A (240V)

200V AC; 208V AC; 220V AC; 230V AC; 240V AC