![](/images/new-backgrounds/1173170/1731709x1.webp)
Mounting Kit Installation
This hub can be placed on a flat surface, mounted on a wall or attached to a standard
Note: The description below is an example due to the various DIN mounting modules and conditions.
Step 1: Fasten the included DIN rail hardware to the side of the unit using the screws provided in the packaging (See Figure A).
Step 2: Affix the hub to your DIN rail
Figure A
To wallmount the hub, fasten the included mounting brackets to the bottom of the unit, with the wallmount holes sticking out. You can then wallmount the hub accordingly.
Notice
•Prior to connecting the hub, it is recommended that you first install your USB device drivers. This will ensure your device will be recognized upon connecting it to the hub.
•The transmission rate is up to 480Mbps when connecting the hub to a USB 2.0 port.
5
01205147 | 5/31/2012 9:48:35 AM |