SECTION 9: OFF-SEASON STORAGE

Prepare your lawn mower for storage at the end of the season or if the unit will not be used for 30 days or more. Store the mower in a clean, dry area.

Gasoline

•Do not store gasoline from one season to another. Gasoline, stored more than one month, may affect engine performance.

•Replace your gasoline can if it starts to rust. Rust and/or dirt in the gasoline will cause problems.

Engine

•Follow recommendations in the accompanying engine manual for off-season storage of the engine.

Mower

NOTE: If storing the mower in an unventilated or metal storage shed, make sure to rustproof the equipment with a light oil or silicone.

•Store unit in a clean, dry area. Do not store next to corrosive materials, such as fertilizer or rocksalt.

•Clean underside of the mower according to instructions on page 12.

NOTE: We do not recommend the use of pressure washers or garden hose to clean your unit. They may cause damage to bearings or the engine. The use of water will result in shortened life and reduce serviceability.

•Lubricate the mower as instructed on page 12.

•You can fold your mower’s handle for convenience of storage.

•Inspect and replace/sharpen blade, if required. Refer to page 13.

SECTION 10: TROUBLE-SHOOTING GUIDE

Problem

 

Possible Cause

 

Corrective Action

Engine fails to start

1.

Blade control handle disengaged

1.

Engage blade control handle.

 

2.

Spark plug wire disconnected

2.

Connect wire to spark plug.

 

3.

Fuel tank empty, or stale fuel

3.

Fill up tank with fresh gasoline.

 

4.

Blocked fuel line

4.

Clean fuel line.

 

5.

Faulty spark plug

5.

Clean, adjust gap, or replace.

 

6.

Engine flooded

6.

Wait a few minutes and start again.

Engine runs erratic

1.

Spark plug wire loose

1.

Connect and tighten spark plug wire.

 

2.

Blocked fuel line or stale fuel

2.

Clean fuel line, fill tank with clean, fresh

 

 

 

 

gasoline.

 

3.

Vent in gas cap plugged

3.

Clear vent.

 

4.

Water or dirt in fuel system

4.

Drain fuel tank. Refill with fresh fuel.

 

5.

Dirty air cleaner

5.

Clean air cleaner. Refer to engine manual.

Engine overheats

1.

Engine oil level low

1.

Fill crankcase with proper oil.

 

2.

Air flow restricted

2.

Clean lawn mower engine.

Occasional skip at high

1.

Spark plug gap too close

1.

Adjust gap to.030 inches.

speed

 

 

 

 

Idles poorly

1.

Spark plug fouled, faulty, or gap too wide

1.

Reset gap or replace spark plug.

 

2.

Dirty air cleaner

2.

Clean air cleaner.

Excessive vibration

1.

Cutting blade loose or unbalanced

1.

Tighten blade and adapter, balance blade.

 

2.

Bent cutting blade

2.

Replace blade.

 

3.

Bent engine crankshaft

3.

Contact your nearest service center

Fails to mulch grass

1.

Wet grass

1. Wait until grass is dry to cut.

 

2.

Excessively high grass

2. Mow once at a high cutting height, then

 

 

 

 

mow again at desired height.

 

3.

Dull blade

3.

Sharpen or replace blade.

Uneven cut

1.

Wheels not in same height position

1.

Reposition all wheels at same height.

 

2.

Dull blade

2.

Sharpen or replace blade.

NOTE: For repairs beyond the minor adjustments listed above, contact your nearest authorized service dealer.

15

Page 14 Page 16
Page 15
Image 15
Troy-Bilt 430 Series manual TROUBLE-SHOOTING Guide, Gasoline, Mower
Page 14 Page 16

430 Series specifications

The Troy-Bilt 430 Series represents a remarkable blend of performance, durability, and user-friendly technology in the realm of outdoor power equipment. Primarily designed for residential lawn care, this series caters to homeowners who demand reliability and efficiency in their garden maintenance tools.

One of the standout features of the Troy-Bilt 430 Series is its powerful 430cc engine. The engine delivers optimal power for maintaining a variety of terrains, from flat lawns to uneven landscapes. Paired with a robust transmission, the Troy-Bilt 430 ensures smooth operation and the ability to tackle thick grass and tough weeds without compromising performance. This power is further complemented by a range of cutting deck options, allowing users to select the ideal size to suit their mowing needs.

The engineering behind the 430 Series focuses on ease of use. The deck is designed for quick height adjustments, enabling users to switch mowing heights from one to another with minimal effort. The intuitive control panel allows for easy starting and operation, while comfortable handles reduce user fatigue, allowing for extended use without discomfort.

An important aspect of the design is the innovative Cleanout Port. This feature simplifies maintenance by providing quick access for cleaning grass clippings from the underside of the deck, ensuring optimal cutting performance and prolonged equipment life. Additionally, the Troy-Bilt 430 Series may incorporate advanced mulching capabilities, converting clippings into a fine mulch that nourishes the lawn while eliminating the need for bagging.

Safety is a top priority in the design of the Troy-Bilt 430 Series. Built-in safety features, such as a blade brake and safety switch, protect the user during operation and maintenance.

The Troy-Bilt 430 Series is not just about power and functionality; it also emphasizes durability. Designed with high-quality materials, the series is built to withstand the rigors of outdoor use, with rust-resistant components and reinforced frames.

In summary, the Troy-Bilt 430 Series is a comprehensive solution for homeowners seeking an effective and reliable lawn care tool. With its powerful engine, user-friendly features, and durable construction, it stands as a worthy investment for anyone looking to maintain an immaculate lawn with ease. Whether navigating tight corners or dealing with tough grass conditions, the 430 Series ensures professional-level results right at home.
Top Page Image Contents