Troy-Bilt 664D-Pony manual Bolo TINES, Wheels, Two ea. Refs 712-0375 Hex Locknut, 3/8-16 710-3096

Parts List 33

Model 664D

BOLO TINES, WHEELS

		NOTE 1: Custom Tilling Tines are
13
	13	available for your tiller. These are

special hard-faced tines that are thicker than standard tines.

IMPORTANT: Left and right sides of tiller are determined by standing in operator position and facing direc- tion of forward travel.

REF.	PART
No.	No.	DESCRIPTION	QTY.
1	710-3105	Hex Hd. Screw, 3/8-16 x 1-1/4*	16

2GW-1270-2A Bolo Tine-single. Right hand tine used on left side of tiller. (Incl.

		two ea. Refs. 1 and 3)	8
3	712-0375	Hex Locknut, 3/8-16	2
5	710-3096	Hex Hd. Screw, 3/8-16 x 2, Grade 8 ....	2

7GW-1270-1A Bolo Tine-single. Left hand tine used on right side of tiller. (Incl.

	two ea. Refs. 1, 9 and 10)	8
8	1902154010 Tine Holder. For left and right sides ....	2

--1901118 Bolo Tine Replacement Set (Incl. eight ea. right hand and left hand tines,

and sixteen ea. Refs. 1 and 3) 1

REF.	PART
No.	No.	DESCRIPTION	QTY.

--GW-2475-1 Custom Tilling Bolo Tine, Left hand

tine (see Note 1 above) 8

--GW-2475-2 Custom Tilling Bolo Tine, Right hand

tine (see Note 1 above) 8

--GW-10802 Custom Tilling Bolo Tine Replacement

		Set (Incl. eight ea. right hand and
		left hand custom tines, and sixteen
		each of Refs. 1 and 3)	1
9	712-3017	Hex Nut, 3/8-16	16
10	736-0169	Lock Washer, 3/8	16
11	GW-9380	Clevis Pin, .312 x 1-3/4	2
12	GW-9338	Hitch Pin	2
13	1917487	Wheel and Tire Assembly	2

* Specify GRADE 5 if ordering part locally.