Section

4Operation

WARNING

Before operating your machine, carefully read and understand all safety (Section 1), controls (Section 3) and operating instructions (Section 4) in this Manual, in the separate Engine Owner’s Manual, and on the decals on the machine.

Failure to follow these instructions can result in serious personal injury.

INTRODUCTION

Read this Section of the manual thoroughly before you start the engine. Then, take the time to familiarize yourself with the basic operation of the tiller before using it in your garden. Find an open, level area and practice using the tiller controls without the tines engaging the soil (put tines in Travel setting— Section 3, Depth Regulator Lever). Only after you’ve become completely familiar with the tiller should you begin using it in the garden.

WARNING

Your tiller and its optional PTO Power Unit attachments are capable of causing serious injury to untrained or careless operators.

To avoid serious personal injury or property damage, read the Owner’s Manual that is provided with any optional accessories or attachments before using the tiller or PTO Power Unit.

Break-In Operation

Perform the following maintenance during the first hours of new operation (see Maintenance Section in this Manual and maintenance information in the Engine Owner’s Manual).

1.Change engine oil after first 2 hours of new engine operation.

Figure: 4-1

2.After the first 2 hours of new operation, check the gear oil levels in the PTO Power Unit and the tine attachment transmissions.

3.Check for loose or missing hardware on unit. Tighten or replace as needed.

4.Check tension on forward drive belt after first 2 hours of operation.

Starting and Stopping the Engine

The following steps describe how to start and stop the engine.

IMPORTANT: Do not attempt to engage the tines, wheels, or any PTO attachment until you have read all of the operating instructions in this Section. Also review the safety rules in Section 1, Safety and the tiller and engine controls information in Section 3, Features and Controls.

Pre-Start Checklist

Make the following checks and perform the following services before starting the engine.

1.Read the Safety and Controls Sections in this Manual. Read the separate Engine Owner’s Manual provided by the engine manufacturer.

2.Check unit for loose or missing hardware. Service as required.

3.Check engine oil level. See Engine Owner’s Manual.

4.Shift the Wheels/Tines/PTO Drive lever (Figure 4-2) into NEUTRAL position. See Section 3, Controls for more information on this lever.

5.Check Safety Guards. All guards and covers must be securely in place.

6.Check air cleaner. See Engine Owner’s Manual.

7.Attach spark plug wire to spark plug.

8.Check Engine Cooling System. Clear cooling fins and air intake screen of debris.

9.Select High/Low Belt Speed range.

10.Adjust Handlebar Height.

11.Fill the fuel tank with gasoline in accordance with the directions in the separate Engine Owner’s Manual. Follow all instructions and safety rules carefully.

DANGER

GASOLINE IS HIGHLY FLAMMABLE AND ITS VAPORS ARE EXPLOSIVE.

Follow gasoline safety rules in this Manual (Section 1) and in the separate Engine Owner’s Manual.

Failure to follow gasoline safety instruc- tions can result in serious personal injury and property damage.

14

Page 14
Image 14
Troy-Bilt E682L, 682J, E686N manual Break-In Operation, Starting and Stopping the Engine, Pre-Start Checklist

E682L, E686N, 682J specifications

The Troy-Bilt E682L and E682J are two powerful and efficient snow throwers designed for residential use, enabling homeowners to tackle winter's toughest snow challenges with ease. Both models are part of Troy-Bilt's commitment to creating durable equipment that simplifies outdoor maintenance.

One of the main features of the Troy-Bilt E682L and E682J is their robust engine. Equipped with a reliable 243cc OHV (Overhead Valve) engine, these snow throwers provide robust power, ensuring that users can clear snow quickly and effectively. The engines are designed for easy starting, even in cold conditions, so you won’t have to worry about fumbling with difficult pull cords when snowy weather strikes.

Another significant characteristic of these models is their 24-inch clearing width combined with a 21-inch intake height. This allows for efficient snow removal, enabling users to clear driveways and sidewalks with fewer passes. The heavy-duty auger system is engineered to cut through packed snow with ease, ensuring that even the toughest winter weather conditions don’t stand a chance.

Both the E682L and E682J feature a 180-degree adjustable chute that directs the snow where it needs to go. This puts control in the hands of the user, preventing snow from being thrown back onto the paths that have already been cleared. The quick-release chute deflector allows for easy height adjustments, giving users the flexibility to adapt to different snow conditions.

These models are also designed with user comfort in mind. The Troy-Bilt E682L and E682J come with heated hand grips, which make operating the snow thrower more pleasant during long periods in cold weather. The ergonomic handles provide a comfortable grip, and the adjustable handle height ensures that users of various sizes can operate the machine comfortably.

Additionally, both models feature large, rugged tires that provide enhanced traction on various surfaces, whether it’s icy pavement or a snow-covered driveway. This design consideration contributes to their overall stability and maneuverability, allowing users to navigate through challenging winter conditions with confidence.

In summary, the Troy-Bilt E682L and E682J snow throwers are powerful, user-friendly machines equipped with essential features that make snow removal efficient and manageable. With their reliable engines, robust clearing capabilities, adjustable chutes, and comfortable handling, these models are valuable tools for any homeowner looking to stay ahead of winter weather.