Troy-Bilt Pro Line Controls and Features, Depth Regulator, Forward Clutch Control, Engine Throttle Control, Wheel Gear Lever, Reverse Clutch Control, Gas Cap, Recoil Starter

Controls and Features	4
Controls and Features

Reverse Clutch Control	Wheel Gear Lever

Forward Clutch

Control Lever

	Handlebar Height	Forward Clutch
	Handlebar Height	Control Lever
	Adjustment Screw	Control Lever
Recoil	Adjustment Screw	Depth
Recoil		Depth
Starter		Regulator
Handle		Lever

Engine Throttle

Control Lever

Figure 4-1

	NOTE: For detailed information on all engine controls, refer to	Depth Regulator
	the seperate Engine Operator’s Manual.	The Depth Regulator lever controls the tilling depth of the tines.
	Forward Clutch Control
	Forward Clutch Control	Pull the lever straight back and slide it up or down to engage the
	The two interconnected levers control the engagement of	notched height settings.
	The two interconnected levers control the engagement of	Engine Throttle Control
	forward drive to the wheels and tines.	Engine Throttle Control
	Wheel Gear Lever

This lever has two positions: ENGAGE and DISENGAGE.

Reverse Clutch Control

The Reverse Clutch Control controls the engagement of reverse drive to the wheels and tines.

The Engine Throttle Control Lever is used to regulate the engine speed. On the recoil start model only, it is also used to stop the engine (on the electric start model, the electric start keyswitch is used to stop the engine).

Gas Cap

Unthread the gas cap to add gasoline to the fuel tank.

Recoil Starter

The recoil starter is used to pull start the engine.

Handlebar Height Adjustment Screw

Handlebar Height is adjustable to four different settings. When setting the height keep in my mind that the handlebars will be lower when the tines are engaged in the soil.