Troy-Bilt Pro Line Suggested tilling patterns

Suggested tilling patterns		•	If the garden size will not permit lengthwise and then
•	When preparing a seedbed, go over the same path twice in		crosswise tilling, overlap the first passes by one-half a tiller
			width, followed by successive passes at one-quarter width

the first row, then overlap one-half the tiller width on the	See Fig. 5-7.
rest of the passes. See Fig. 5-5.

			1
					2
			3
	Figure 5-5			Figure 5-7
•	When finished in one direction, make a second pass at a	•	With planning, you can allow enough room between rows
			to cultivate. See Fig. 5-8. Leave room for the hood width,
	right angle as shown in Fig. 5-6. Overlap each pass for the
			plus enough extra room for future plant growth.
	best results (in very hard ground it may take three or four
	passes to thoroughly pulverize the soil).

Figure 5-8

Figure 5-6

14Section 5— Operation