Troubleshooting | 8 |
| |
|
|
Problem |
| Cause |
| Remedy |
|
|
|
|
|
|
|
|
|
|
Wheels/Tines will not turn | 1. | Improper use of controls. | 1. | Review Operation section. |
| 2. | Worn, broken, or | 2. | Replace or adjust belts. |
| 3. | Internal transmission wear or damage. | 3. | Contact local authorized dealer. |
| 4. | Bolt loose in transmission pulley. | 4. | Tighten bolt. |
|
|
|
|
|
Tines turn, but wheels don’t | 1. | Wheel Drive Pins not in WHEEL DRIVE. | 1. | Inserts Drive Pins properly. |
| 2. | Bolt loose in transmission pulley. | 2. | Tighten bolt. |
| 3. | Internal transmission wear or damage. | 3. | Contact local authorized dealer. |
|
|
|
|
|
Wheels turn, but tines Don’t | 1. | Tine holder mounting hardware missing. | 1. | Replace hardware. |
| 2. | Bolt loose in transmission pulley. | 2. | Tighten bolt. |
| 3. | Internal transmission wear or damage. | 3. | Contact local authorized dealer. |
|
|
|
|
|
Poor tilling performance | 1. | Worn tines. | 1. | Replace Tines. |
| 2. | Improper Depth Regulator setting. | 2. | See “Tilling Tips & Techniques.” |
| 3. | Forward Drive Belt slipping. | 3. | See Maintenance & Adjustments Section. |
|
|
|
|
|
19