Troy-Bilt TB2000 manual

Models

TB2000 – 22.5cc Curved Shaft

FORM 182821 (1/01) (10201 rev. A)

Printed in U.S.A.

Owner/Operator

Manual

2-Cycle Trimmer

• Safety

• Assembly

• Operation

• Maintenance

Contents

Main Introduction THANK YOU Contents of Carton PRODUCT REFERENCES, ILLUSTRATIONS AND SPECIFICATIONS Table of Contents Service Information SERVICE INFORMATION WARNING: Identification Numbers SYMBOL MEANING Safety IMPORTANT SAFETY INFORMATION READ ALL INSTRUCTIONS BEFORE OPERATING SAFETY WARNINGS FOR GAS TRIMMERS SAVE THESE INSTRUCTIONS OTHER SAFETY WARNINGS Page Page Section 2 Know Your Unit Section 3 Assembly INSTALLING AND ADJUSTING THE D-HANDLE INSTALLING THE CUTTING ATTACHMENT SHIELD Section 4 Oil and Fuel Oil and Gas Mixing Instructions + 1 US. GALLON +4.0 FL. OZ. (3.8 LITERS) (118 ml) MIXING RATIO - 32:1 Operation STARTING INSTRUCTIONS STOPPING INSTRUCTIONS Operation (continued) HOLDING THE TRIMMER ADJUSTING TRIMMING LINE LENGTH TIPS FOR BEST TRIMMING RESULTS Operation (continued) MAINTENANCE MAINTENANCE SCHEDULE MAINTENANCE NEEDED WHEN GO TO: LINE INSTALLATION Single Line Installation Membrane Line Installation INSTALLING A PREWOUND REEL PAWL REPLACEMENT AIR FILTER MAINTENANCE CARBURETOR ADJUSTMENT REPLACING THE SPARK PLUG Do not sand blast, scrape, or clean electrodes. Grit in the engine could damage the cylinder. ACCESSORIES/REPLACEMENT PARTS CLEANING STORAGE LONG TERM STORAGE TRANSPORTING Troubleshooting CUTTING LINE ADVANCES UNCONTROLLABLY ENGINE LACKS POWER OR STALLS WHEN CUTTING ENGINE WILL NOT START ENGINE WILL NOT IDLE ENGINE WILL NOT ACCELERATE Specifications ENGINE DRIVE SHAFT & CUTTING ATTACHMENT Page MANUFACTURERS LIMITED WARRANTY FOR: MTD Southwest Inc 550 N. 54th Street Chandler, AZ 85226 U.S.A.