Troy-Bilt TB70SS 6

ASSEMBLY INSTRUCTIONS

OPERATING THE EZ-LINK™ SYSTEM

The EZ-Link™ system enables the use of these optional Add-Ons.

Cultivator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TBGC

Edger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TBLE

Hedge Trimmer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TBAH*

Straight Shaft Trimmer . . . . . . . . . . . . . . . . . . . . . . . . . . . TBSS

Turbo Blower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TBTB

Pole Saw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TBPS*

Brushcutter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TBBC*

*Do NOT use this attachment with an electric powered product.

WARNING: Before you begin using any attachment, read and understand the manual that came with the attachment. Follow all safety information contained within.

Removing the Cutting Attachment or Add-Ons

2.While firmly holding the add-on, push it straight into the EZ-Link™ coupler (Fig. 7).

NOTE: Aligning the release button with the guide recess will help installation (Fig. 6).

Release Button

EZ-Link™ Coupler

Primary Hole

Upper Shaft Housing

Lower Shaft Housing

Fig. 7

3.Turn the knob clockwise to tighten (Fig. 8).

1.Turn the knob counterclockwise to loosen (Fig. 6).

2.Press and hold the release button (Fig. 6).

3.While firmly holding the upper shaft housing, pull the cutting attachment or add-on straight out of the EZ- Link™ coupler (Fig. 7).

Installing the Cutting Attachment or Add-Ons

WARNING: To avoid serious personal injury and damage to the unit, shut the unit off before removing or installing add-ons.

NOTE: To make installing or removing the add-on easier, place the unit on the ground or on a work bench.

1.Turn knob counterclockwise to loosen (Fig. 6).

EZ-Link™ Coupler	Release Button

CAUTION: Lock the release button in the primary hole (Fig. 7) and securely tighten the knob before operating this unit.

90˚ Edge

Trimming Hole

Knob

Fig. 8

CAUTION: The add-ons with the coupler system is to be used in the primary hole only. Using the wrong hole could lead to personal injury or damage to the unit.

Knob		For decorative trimming/edging with the line head cutting
		For decorative trimming/edging with the line head cutting
	Guide Recess	attachment, lock the release button of the cutting attachment
	Guide Recess	into the 90° hole (Fig. 8).
		into the 90° hole (Fig. 8).

Fig. 6