emoval & Replacement | 750E & 750EA |
Remove Hub Assemblies
Tools Required:
Elliptical Wrench (pn: 90361501)
Channel Lock Pliers
Flat Blade Screwdriver
Step 1.
Use elliptical wrench or pliers to
Remove large hex nuts holding hub
Assembly in place.
Step 1. Remove Large Hex Nut.
Step 2.
Remove retainer clip with
Screwdriver
To remove wheel from frame, slip
Shaft through bearing.
Step 2. Remove Clip.
Step 3.
Pull wheel and hub assembly out as
A unit. Bearings and axle cannot be
Field serviced.
Step 3. Pull Assembly Out.
Page 48
Copyright 2001 True Fitness Technology, Inc.
