Removal & Replacement | 600 |
Remove Brake
Tools Required:
Phillips Screw Driver
Step 1. Brake Bracket Removal.
Step 1.
Remove screw holding the nagnet
Brake bracket located under the rear
Brake with Phillips head screw driver.
Step 2.
Disconnect electrical terminal at
Brake.
Step 2. Disconnect Electrical Terminal at Brake.
Step 3.
Disconnect electrical terminal from
The console set at the control box
Located above the brake.
Step 3. Disconnect Cable from Control Box.
Page 40
Copyright 2001 True Fitness Technology, Inc.
