True Manufacturing Company PRECISION 8i SAFETY and OPERATING PRECAUTIONS, Important Information

SAFETY and OPERATING PRECAUTIONS

Important Information:

This symbol indicates the presence of dangerous voltage within the product enclosure that presents the risk of electric shock injury. When this symbol appears next to an operation discussed in this manual, only qualified

technical personnel should perform that operation.

This symbol indicates important operating or maintenance instructions that should be read carefully. Failure to observe these instructions could result in damage to the product or other property.

WARNINGS:

∙ To reduce the risk of electric shock injury, do not remove the top cover or rear panel. Uninsulated dangerous voltage exists within the product’s enclosure. Refer servicing to qualified personnel.

∙ Do not defeat the earth ground connection in the AC power cable. Tips for eliminating ground loops are discussed in the “TROUBLESHOOTING”section of this manual.

∙ Do not operate this unit in the presence of rain, liquids or condensing moisture. Liquid entering the product enclosure presents the risk of electric shock injury. Do not touch the AC plug or enclosure with wet hands.

∙ Do not defeat intended AC power connection polarization.

∙ Do not use a damaged or excessively worn cord to connect this unit to AC power.

CAUTIONS:

∙ Severe damage may be caused to your unit if the AC voltage setting is not correct for the AC power available in your area. The voltage setting is visible on the AC inlet module on the International Power Supply Module (PSU-P8i). See section on “AC Mains Connection”for instructions on selecting the proper AC voltage setting. If you are unsure about this, contact your dealer or TRUE Systems. Product failure caused by improper voltage setting will not be covered under warranty.

∙ Do not operate this unit in the presence of rain, liquids or condensing moisture. Liquid entering the product enclosure is likely to cause performance degradation or failure. Failures due to moisture entering the enclosure will not be covered under warranty.

∙ Should liquid spill on the unit, immediately disconnect it from the AC power source and return it to your dealer or TRUE Systems for servicing.

∙ This product is designed to operate in an ambient temperature environment not to exceed 50°C (122°F). Please ensure that this unit is mounted in such a way that vents are not blocked and ambient temperature does not exceed 50°C.

2