True Manufacturing Company T-23DT installation manual Installation Of Castors Or Optional Legs

5

The end of the leg is adjustable to easy leveling.

For leveling, insert the shim between the castor and frame rail.

Lower Rail

Assembly

Rail End

1

Thread castor into the underside of cabinet frame rail.

2

Securing Castors and Legs

To obtain maximum strength and stability of the unit, it is important that you make sure each castor is secure. Optional legs are hand-tightened securely against the lower rail assembly see image 4-5. The bearing race on the castor or the top edge of the leg must make firm contact with the rail.

Unit leveling

Four leveling shims have been provided for leveling castored units positioned on uneven floors. Shims must be positioned between rail end and bearing race.

A. Turn the bearing race counter-clockwise until the cabinet is level. Level front to back and side to side. (diagonally)

True Food Service Equipment, Inc.

INSTALLATION / OPERATION INSTRUCTIONS

INSTALLATION OF CASTORS OR OPTIONAL LEGS

Important Safeguard for installation of leg/castor (Images 1-5 demonstrate procedure)

B. Install the desired number of shims, making sure the slot of the shim is in contact with the threaded stem of the castor. (See image 2)

C. If more than one shim is used, turn the slot at a 90° angle so they are not in line.

D. Turn the bearing race clockwise to tighten and secure

the castor by tightening the anchoring bolt with a

3/4 inch open-end wrench or the tool provided.

(See image 3)

CAUTION

To avoid damage to lower rail assembly, slowly raise unit to upright position.

NOTE

Open holes located on the cross members of the frame rail should be plugged before unit is in use.

Snug Fit Here

3	4
Use the tool provided to tighten	Thread leg into cabinet bottom
the castor into place.	frame rail.
Lower Rail Assembly
Rail End
	Snug Fit
	Here
	Bearing
	Race
Leveling Shim

LegCastor

6 www.truemfg.com 6